Sierra FJ44 Super II And Super S-II Gain Canadian STC Approval | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.03.24

Airborne-NextGen-06.04.24

Airborne-Unlimited-06.05.24 Airborne-Unlimited-05.30.24

Airborne-Unlimited-05.24.24

Fri, Nov 20, 2009

Sierra FJ44 Super II And Super S-II Gain Canadian STC Approval

Re-Engining Mods Now Approved In More Than 33 Countries

Canada’s Department of Transport has amended STC approval number SA06-54 for Sierra Industries, adding the Citation 550 and S550 models to their existing Williams FJ44 engine upgrades for Cessna Citation 500 and 501 aircraft. Since the initial 2002 certification, Sierra’s FJ44 modifications have been applied to 54 aircraft. The high-performance fleet of Citation I, II and S-II aircraft have amassed a total of more than 50,000 hours of Williams engine operation to date.

Williams International’s 3rd-generation engine technology increases efficiency, reducing fuel burn, operating cost and carbon emissions. Since the 2002 introduction of the FJ44 Eagle II, Sierra’s FJ44 fleet has reduced worldwide carbon emissions by an estimated 10,000 tons. The aircraft also enjoy substantial performance improvements, ranging from 35 to 50 knot cruise speed increases and 300 to 400 NM greater range to dramatically improved climb performance. In fact, all 4 models can achieve FL430 at gross weight in under 25 minutes from any North American airport, making them ideal candidates for remote Canadian locations and high altitude airfields.

Williams FJ44

Building on Sierra’s 25 years of Citation modification history and 15 years of experience in Citation re-engining, Sierra’s current re-engining lineup includes the highly successful FAA and EASA-approved FJ44-2A Eagle II and Stallion and the FAA-approved FJ44-3A Super II and Super S-II modifications. Supporting these modifications with their extensive in-house manufacturing capabilities, Sierra is among the largest holders of FAA Parts Manufacturing Approvals (PMA) in the southwestern US.

Sierra recently announced new incentives for advance booking of 2010 modifications, reducing their 2009 pricing. FJ44-2A Stallion upgrades start at under $1.55 million and FJ44-3A Super II and Super S-II positions are available starting under $1.75 million. Trade-in allowances are also available on existing Pratt engines with time remaining.

FMI: www.sijet.com

Advertisement

More News

Airborne 06.05.24: Yakstars Midair, Electra eSTOL Test, Space Tour No-Go

Also: Aerox 'Cylinder Sentinel', Annual TBM Reunion, Hubble Pause, Utah AAM A combined Spanish-Portuguese aerobatic demo team suffered a fatality at the Beja AirShow, when one of t>[...]

Classic Aero-TV: Aviation Prop Masters--Hartzell Composite Props for the KingAir

From 2019 (YouTube Version): Hartzell Propeller Secures STC For King Air Propellers Hartzell Propeller has secured an FAA Type Certificate for a new five-blade carbon fiber propell>[...]

Aero-News: Quote of the Day (06.03.24)

"Starship’s third flight test made tremendous strides towards a future of rapidly reliable reusable rockets. The test completed several exciting firsts, including the first S>[...]

ANN's Daily Aero-Linx (06.03.24)

Aero Linx: Utah Back Country Pilots Association (UBCP) We hope to promote flying in Utah, and we welcome you to our state. We recognize the inherent hazards and risk involved in ba>[...]

ANN's Daily Aero-Term (06.03.24):Maximum Authorized Altitude

Maximum Authorized Altitude A published altitude representing the maximum usable altitude or flight level for an airspace structure or route segment. It is the highest altitude on >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC