Fri, Mar 20, 2020
Large Solid Rocket Motor Development Facility Nears Completion
Aerojet Rocketdyne has installed a steel casting bell to support production of large solid rocket motors, marking an important milestone for completion of its Engineering, Manufacturing and Development (EMD) facility in Camden, Arkansas.
The vacuum chamber casting bell was relocated from Aerojet Rocketdyne’s Sacramento, California, facility, where it was used to produce large rocket boosters for the Atlas V rocket. In Camden, it will be used to produce large solid rocket motors for programs, including hypersonics and intercontinental ballistic missiles. The Camden facility will be able to produce motors up to 470 inches long and up to 100 inches in diameter.
“The installation of the casting bell is a major milestone as Aerojet Rocketdyne continues to prepare for national security programs, including the Air Force’s Ground Based Strategic Deterrent program and the Missile Defense Agency’s Next Generation Interceptor program,” said Eileen Drake, Aerojet Rocketdyne CEO and president. “I would especially like to thank state and local leaders from the great State of Arkansas whose efforts have been critical to our ongoing expansion here in Camden.”
The casting bell is a vacuum chamber that eliminates air bubbles that can otherwise form when propellant is poured into solid rocket motor casings. The chamber also serves as an oven that heats the propellant during the curing process, and then cools it back down to ambient temperature.
Aerojet Rocketdyne broke ground on its 17,000 square-foot EMD facility in spring 2019 as a part of an ongoing expansion of its Camden operations, where the company has had a presence since 1979. The $15.5 million state-of-the-art facility is slated to open this spring.
(Image provided with Aerojet Rocketdyne news release)
More News
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]