AD: Construcciones Aeronauticas | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Jun 13, 2009

AD: Construcciones Aeronauticas

AD NUMBER: 2009-12-04

MANUFACTURER: Construcciones Aeronauticas, S.A. (CASA), Model C-212-CB, C-212-CC, C-212-CD, C-212-CE, C-212-CF, and C- 212-DE Airplanes
SUBJECT: Airworthiness Directive 2009-12-04

 

SUMMARY: We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

  • Incidents have been reported on Britten-Norman BN-2 aircraft, where cracks were found in the inner shell of the pitot/static pressure heads. The investigation concluded that these pitot tubes, supplied by Thales Optronics, could be operated outside their voltage specification. On December 15th, 2005, CAA [Civil Aviation Authority] United Kingdom issued AD G-2005-0034 (EASA approval number 2005-6447), later superseded by EASA AD 2006-0143, to require inspections and leak tests on Britten-Norman aircraft. Subsequently, it has been discovered that the same tubes are supplied to EADS-CASA for installation on C-212 aircraft, one for the pilot side and one for the co-pilot side. So far, EADS-CASA has not received any report of cracked pitot tubes from C-212 operators.
  • This condition, if not corrected, could result in incorrect readings on the pressure instrumentation, e.g., altimeters, vertical speed indicators (rate of climb) and airspeed indicators, potentially leading to navigational errors. 
  • The unsafe condition could reduce the ability of the flightcrew to maintain the safe flight and landing of the airplane. We are issuing this AD to require actions to correct the unsafe condition on these products.
FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/5B16AB2B9AB16A86862575D2004A9A56?OpenDocument

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC