NTSB: No Tire Problems Apparent On Jet That Hit A Hangar In Santa Monica | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Oct 26, 2013

NTSB: No Tire Problems Apparent On Jet That Hit A Hangar In Santa Monica

Preliminary Report Indicates All Three Tires Were Inflated And Showed No Abnormal Signs Of Wear

Witness reports from an accident in Santa Monica, CA involving a Cessna Citation indicated that the airplane appeared to "blow a tire" on landing, causing it to veer off the runway and impact a hangar. The accident and ensuing fire resulted in the fatal injury of the four people on board the airplane.

But the NTSB's preliminary report does not indicate that there was a problem with the tires on the airplane.

According to the report, on September 29, 2013, at 1820 Pacific daylight time, a Cessna 525A Citation, N194SJ, veered off the right side of runway 21 and collided with a hangar at the Santa Monica Municipal Airport, Santa Monica, California.  The private pilot and three passengers were fatally injured, and the airplane was destroyed by a post-crash fire. The airplane was registered to CREX-MML LLC, and operated by the pilot as a 14 Code of Federal Regulations, Part 91 flight. Visual meteorological conditions prevailed for the flight, which operated on an instrument flight rules flight plan. The flight originated at Hailey, Idaho, about 1614.
 
Witnesses reported observing the airplane make a normal approach and landing.  The airplane traveled down the right side of the runway, eventually veered off the runway, impacted the 1,000-foot runway distance remaining sign, continued to travel in a right-hand turn, and impacted a hangar structural post with the right wing.  The airplane came to rest inside the hangar and the damage to the hangar structure caused the roof to collapse onto the airplane. A post-accident fire quickly ensued.
 
On-scene examination of the wreckage and runway revealed that there was no airplane debris on the runway. The three landing gear tires were inflated and exhibited no unusual wear patterns. The FAA control tower local controller reported that the pilot did not express over the radio any problems prior to or during the landing.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC