NTSB Prelim: Czech Sport Cruiser | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Sun, Nov 01, 2020

NTSB Prelim: Czech Sport Cruiser

Airplane Was In Level Flight On A Heading Of 070° And At An Altitude Of 3,500 Ft When Radar Contact Was Lost

Location: Waterloo, AL Accident Number: ERA21FA010
Date & Time: October 7, 2020, 12:30 Local Registration: N251SC
Aircraft: CZECH SPORT CRUISER Injuries: 1 Fatal
Flight Conducted Under:

On October 7, 2020, about 1230 central daylight time, a Czech Aircraft Works Sport Cruiser, N251SC, was substantially damaged when it was involved in an accident near Waterloo, Alabama. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

According to the pilot’s spouse, the pilot departed McKinney National Airport (TKI), McKinney, Texas earlier on the day of the accident, flew to Ripley Airport (25M), Ripley, Mississippi to refuel the airplane, and then departed for his home airport in Oakridge, Tennessee.

According to initial information obtained from the Federal Aviation Administration, about 35 minutes after takeoff from 25M the airplane was in level flight on a heading of 070° and at an altitude of 3,500 ft when radar contact was lost. The pilot was not in radio communication with air traffic control at the time of the accident.

The airplane was subsequently located in a heavily wooded area. It came to rest inverted and crushed.

All flight control surfaces were located at the accident site and flight control continuity was established throughout the airframe. The engine remained attached to the airframe and the engine controls were crushed. The propeller blades were separated from the propeller hub and all blades were located within the debris field. The propeller hub was separated from the engine and also located within the debris field.

The wreckage was recovered for further examination

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.16.24): Instrument Runway

Instrument Runway A runway equipped with electronic and visual navigation aids for which a precision or nonprecision approach procedure having straight-in landing minimums has been>[...]

ANN's Daily Aero-Linx (05.16.24)

Aero Linx: Alaska Airmen's Association The Alaska Airmen's Association includes over 2,000 members—we are one of the largest General Aviation communities in the country. We s>[...]

Airborne 05.15.24: Ghost Sq MidAir, B-2 Junked, Dream Chaser Readies

Also: Flt School Security, G600 Steep-Approach, Honduran Aid, PW545D Cert Two aircraft performing at the Fort Lauderdale Air Show clipped wings during a routine last Sunday, spooki>[...]

Airborne 05.10.24: Icon Auction, Drunk MedEvac Pilot, Bell ALFA

Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]

Airborne Affordable Flyers 05.16.24: PRA Runway, Wag-Aero Sold, Young Eagles

Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC