Intercontinental Jet Service Corp Awarded MU-2 STC for Scimitar Hartzell Props | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Nov 18, 2020

Intercontinental Jet Service Corp Awarded MU-2 STC for Scimitar Hartzell Props

New Installation Saves 17 Pounds Per Engine And Delivers Better Performance

Intercontinental Jet Service Corp (IJSC), Tulsa, has obtained an STC for Hartzell Propeller’s scimitar four-blade aluminum prop installations on MU-2 twin-engine aircraft. Models covered include more than 260 MU-2B, -26A, -40, -36A, and -60 aircraft built by Mitsubishi.

The STC by IJSC, a Hartzell Propeller Recommended Service Facility, replaces the previous Hartzell steel hub prop installations with lighter weight aluminum hubs and blades. The new installation saves 17 pounds per engine and delivers better performance.

“Intercontinental Jet and Hartzell collaborated closely on this project and we are pleased that many MU-2 operators now have an opportunity for better performance with a much more economical and convenient time between overhaul with this STC,” said Hartzell President JJ Frigge.

"Hartzell's scimitar design delivers optimized performance, reduced noise signature and better fuel efficiency."

IJSC's first installation under the new STC was on a MU-2 owned by Jay Consalvi, a Colorado-based ex-Navy fighter pilot. In addition to flying numerous combat missions in F-14 Tomcats and F-18F Super Hornets off the U.S.S. Harry Truman, he won the 2017 National Championship Reno Air Races.

"The new scimitar design is cool. It looks like it means business and it's ready to go racing," Consalvi says. "It starts quicker and cooler. Smoother and quieter than the previous props. I fly a lot of long legs at 96% and I get nearly the same cruise speed I had with the old props at 100%. And I climb to 280 in 2 minutes less." he added.

Available through IJSC, the completed kit includes installation, custom polished and larger aluminum spinner, propeller to engine rigging and dynamic balance for $85,000, with trade-in of existing propellers. The lighter weight aluminum hub propellers have an extended 4,000-hour/six-year TBO, whichever occurs first. The previous steel hub propellers had a 3,500-hour/five-year TBO.

FMI: https://ijetservice.com, www.hartzellprop.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC