Wed, May 07, 2014
Stems From Accident In Germany In Which Main Gear Did Not Lock Down, Airplane Damaged
The FAA has issued a Special Airworthiness Information Bulletin (SAIB) related to an airworthiness concern with Cessna Model 177RG and Reims Model F177RG airplanes. The SAIB recommends the inspection of the MLG actuator rod end bearing to ensure that cracks are not present.
In August 2012, a German-registered Cessna Model 177RG airplane made an emergency landing in Spain with the main gear not locked in the down position. No injuries were reported, but the airplane was damaged. The MLG actuator rod end bearing, Cessna part number S2049-6FG or S2049M6FG, had fractured at the location of the lubrication hole.
The FAA conducted an in-depth review of the MLG actuator failures as a result of the German incident. Our investigation found that there are approximately 878 Cessna Model 177RG airplanes listed in the FAA N-number registry ranging in age from 35 to 43 years. The result of our investigation and risk analysis show that infrequent failure of the MLG actuator on these model airplanes could result in damage to the underside of the airplane if the MLG does not extend and lock down. The SDRs reflect that adequate service information is available and being used by owners and operators to properly maintain their airplanes. As an example, several SDR reports mentioned the Cessna Service Information Letter SE79-37R1. However, we feel issuance of this SAIB will serve as notice to those owners, operators, and maintenance technicians who may not be aware of the Cessna service information.
The FAA recommendations include:
- Identify MLG actuator cracks and if cracks are present, replacement should be done to prevent the possibility of an airplane landing with the MLG not extended and locked down.
- Whether or not cracks are found replace Cessna part numbers S2049-6FG or S2049M6FG with Cessna part number S3469-1 if not previously replaced by S2426-6 per SE79-37R1.
- Comply with Cessna Service Information Letter SE79-37R1 dated December 15, 1980. Additional information is provided in Supplemental Inspection Number 32-10-01, D991-3-13 Temporary Revision Number 7, dated December 1, 2011, in Section 2A-14-03 of the Cessna Aircraft Company Model 177RG Series (1971-1975) Service Manual.
(Image from file)
More News
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Aero Linx: International Association of Professional Gyroplane Training (IAPGT) We are an Association of people who fly, build or regulate Gyroplanes, who have a dream of a single >[...]
NORDO (No Radio) Aircraft that cannot or do not communicate by radio when radio communication is required are referred to as “NORDO.”>[...]
Beyond Visual Line Of Sight (BVLOS) The operation of a UAS beyond the visual capability of the flight crew members (i.e., remote pilot in command [RPIC], the person manipulating th>[...]
Aero Linx: Malibu M-Class Owners and Pilots Association (MMOPA) The Piper M-Class Owners & Pilots Association (PMOPA) is a not-for-profit organization dedicated to the interest>[...]