AeroSports Update: First Customer-Built SubSonex Flies! | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Oct 21, 2015

AeroSports Update: First Customer-Built SubSonex Flies!

The First Customer Built SubSonex Personal Jet Has Made Its First Flight, Making It The Third Flying Aircraft

It was only a week ago that Sonex let us know they had completed their second factory SubSonex aircraft. Now, they are reporting that the first customer built kit version of the SubSonex has made its first flight.

Redge Greenberg of Durango, CO made the first flight of his SubSonex serial number JSX0003 on October 15th, which makes his SubSonex the first customer-built Personal Jet to fly. "I flew the SubSonex this morning, for about 35 minutes… all went well," writes Greenberg. "My regards to Dwight Tolfer who was a big help for me during the construction project that was done almost entirely in my garage."

Greenberg received the first SubSonex kit delivery in February, 2015, an Ultra-Quick-Build kit with optional Triton Trailer. The SubSonex is sold as a Quick Build Kit only, leaving very little work for the customer, and providing almost everything needed to fly with the exception of avionics and paint.

Two Quick Build Kit versions are offered: an experimental amateur built kit for the traditional builder including pre-built wings, fuselage and canopy; and an Experimental Exhibition category Ultra-Quick Build Kit with no “51 percent rule” requirement.

With the Ultra-Quick Build, the builder installs the removable outboard wing panels; engine and fuel system; bolt-in the retractable landing gear; avionics; electrical systems and controls; the BRS; fiberglass components and upholstery; and adds paint.

"I hold commercial glider, helicopter & single engine land licenses, accumulating 4500+ hours in numerous aircraft," wrote Greenberg, "but I never got the chance to fly a jet. I first saw the prototype of the SubSonex at Oshkosh, and followed the development for over a year. When Sonex offered the jet as a kit, I was first in line. Like my RV8, the SubSonex is aerobatic, but the Sonex Company also included a ballistic parachute for extra safety."

Six more customer kits are currently under construction.

(Image of Redge Greenberg  provided by Sonex)

FMI: www.sonexaircraft.com/

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC