AD: Leonardo S.p.a. Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sun, Oct 24, 2021

AD: Leonardo S.p.a. Helicopters

AD 2021-20-12 Prompted By Failure Of An Emergency Flotation System (EFS) Float Compartment To Inflate

The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AB139, AW139, AB412, and AB412 EP helicopters.

This AD was prompted by failure of an Emergency Flotation System (EFS) float compartment to inflate during maintenance of the EFS. This AD requires inspecting certain EFSs and depending on the results, marking certain parts or removing certain parts from service, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 22, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2019-0311, dated December 19, 2019 (EASA AD 2019-0311), to correct an unsafe condition for Leonardo S.p.A., formerly Finmeccanica Helicopter Division, AgustaWestland, Agusta S.p.A., Model AB139, AW139, AB412, and AB412EP helicopters.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Leonardo S.p.a. Model AB139, AW139, AB412, and AB412EP helicopters. The NPRM published in the Federal Register on July 30, 2021 (86 FR 40962). The NPRM was prompted by failure of an EFS float compartment to inflate during maintenance of the EFS. The NPRM proposed to require inspecting each EFS supply hose and depending on the results, re-identifying or removing the EFS supply hose from service, as specified in an EASA AD.

The FAA is issuing this AD to address a blocked float supply hose. See EASA AD 2019-0311 for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC