NTSB: Boeing 737 Designed To Limit 'Tear' Damage | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Jul 16, 2009

NTSB: Boeing 737 Designed To Limit 'Tear' Damage

Airliner That Depressurized 'Performed As Designed'

The Southwest Airlines Boeing 737 which depressurized after a hole developed in its roof was designed to limit damage in such an accident, according to the NTSB.

File Photo

USA Today reports that NTSB Spokesman spokesman Peter Knudson said Federal regulations require jets to be able to experience a tear in the fuselage without the damage spreading. "This safety feature performed as designed," Knudson said.

The flight, which originated in Nashville, TN was enroute to Baltimore when a 14-by-17-inch rectangle of the airplane's skin tore away, leaving a hole open to the sky near the rear of the aircraft. Passengers reported hearing a loud "Pop" about 30 minutes into the flight, and then the oxygen masks dropped from their compartments above the seats. The pilot made an emergency landing in West Virginia.

Southwest Airlines spokesperson Beth Harbin said the airline inspected all of its Boeing 737-300 aircraft after Monday's incident, and no other problems were discovered.  The plane that depressurized was delivered to Southwest in 1994.

FMI: www.ntsb.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC