Tue, Mar 26, 2013
SN 003 Will Be Used For Avionics, Noise, Electrical Testing
The third prototype of the midsize Legacy 500 business jet has made its first flight, according to officials from Embraer Executive Jets. “With the first two prototypes already well into the flight test program, the first flight of the third Legacy 500 is a major milestone for the program,” said Ernest Edwards, President, Embraer Executive Jets. “The four-aircraft test program is designed to ensure all systems and features on the Legacy 500 reach maturity before entering service. The first and second prototypes already have logged 122 hours on 66 flights with testing proceeding as anticipated.”
After being rolled out on February 25, the Legacy 500 SN 003 is being used to test avionics, noise, electrical systems and the interior. Testing the interior to ensure a smooth EIS is key to the success of the program because it allows the company to test for failures and address problems before service entry, confirming the Company’s dedication to delivering an unmatched customer experience.
To that end, Embraer Executive Jets took the unusual step of producing an interior rig using an actual metallic fuselage equipped with the complete interior. The goal is to gain maturity in terms of assembly and to take managers and engineers on virtual flights between two and six hours to test comfort, reliability and durability. The interiors rig underwent rigorous testing of the seats, the galley as well as the lavatory. The company also had test results validated by outside labs.
The maturity campaign included more than 13,000 hours on the Legacy 500 Iron Bird since it entered service in 2010. The Iron Bird is used to test and re-test the aircraft at each development phase and integrates all systems including air management, avionics, power plant, electrical systems, flight controls, specific fly-by-wire control law tests, synoptics and CAS messages tests as well as failure mode case analysis tests.
In addition, during the maturity campaign each of the prototypes will have all maintenance reports uploaded into the Aircraft Health Analysis and Diagnosis (AHEAD) system which collects maintenance data for more efficient, thorough and easier maintenance planning. The computational, web-based maintenance platform is designed to ensure maximum readiness by limiting down time. Once in service with customers, AHEAD accelerates fault identification, allowing maintenance technicians to plan troubleshooting responses while the aircraft is still in flight.
(Image provided by Embraer)
More News
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Aero Linx: International Association of Professional Gyroplane Training (IAPGT) We are an Association of people who fly, build or regulate Gyroplanes, who have a dream of a single >[...]
NORDO (No Radio) Aircraft that cannot or do not communicate by radio when radio communication is required are referred to as “NORDO.”>[...]
Beyond Visual Line Of Sight (BVLOS) The operation of a UAS beyond the visual capability of the flight crew members (i.e., remote pilot in command [RPIC], the person manipulating th>[...]
Aero Linx: Malibu M-Class Owners and Pilots Association (MMOPA) The Piper M-Class Owners & Pilots Association (PMOPA) is a not-for-profit organization dedicated to the interest>[...]