Tue, Sep 19, 2006
Failed To Verify 'Three Green'
Investigators with the US Air Force have determined it was pilot
error that led to the May 8, 2006 gear-up landing of a B-1 Lancer
on a runway in Southwest Asia.
According to the final report released by authorities at Dyess
AFB, TX Monday, the pilot unexpectedly turned over aircraft control
to the co-pilot on the final approach. The pilot reported to the
air traffic control tower that the landing gear was down, despite
the fact that the descent/before landing checklist was never
completed -- and worse, the landing gear was never lowered.
The red warning light in the gear handle -- indicating all
landing gear was not down and locked -- was illuminated for more
than four minutes during the approach. Additionally, at the time
the aircraft landed, the three "gear down" green position lights
were not illuminated.
The Lancer slid 7,500 feet on its belly and engine pods, before
finally coming to rest.
Investigators concluded the cause of the mishap was both pilots'
failure to lower the landing gear during the aircraft's approach
and landing. Contributing factors for the pilots' failure to lower
the landing gear were the co-pilot's task oversaturation; the
co-pilot's urgency to complete a long mission; both pilots'
inattention to instrument readings and the descent/before landing
checklist, and the co-pilot's false belief the pilot had lowered
the landing gear.
As Aero-News reported, all
four crewmembers onboard the Lancer were able to evacuate the
stricken plane. The co-pilot suffered a minor back injury, and the
other three crew members were not injured.
Damage totaled approximately $7.9 million for the aircraft and
the damage to the runway totaled approximately $14,025. The
aircraft is assigned to the 9th Expeditionary Bomb Squadron of the
7th Bomb Wing at Dyess AFB.
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]