Canadian TSB Finds Landing Gear Crack Contributed To Runway Excursion | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Sat, Mar 28, 2015

Canadian TSB Finds Landing Gear Crack Contributed To Runway Excursion

Accident Involving Piper Malibu Mirage Occurred January 2014 In Alma, Quebec

The Transportation Safety Board of Canada (TSB) has released its investigation report (A14Q0011) into the runway excursion of a Piper Malibu Mirage aircraft in Alma, Quebec.

On 23 January 2014, a privately operated Piper Malibu Mirage aircraft departed Montréal International (Mirabel) Airport for Alma, Quebec, with a pilot and one passenger on board. The flight was uneventful until the landing when the nose wheel contacted the runway and directional control was lost. The aircraft veered left and departed the runway surface 400 feet after the loss of control. The aircraft came to a stop about 100 feet from the runway edge in a compacted snow bank. There were no injuries. The aircraft was substantially damaged.

During the approach, the pilot selected the landing gear down and was provided with an indication in the cockpit that all three landing gears were down and locked. However, the nose gear was not fully down and locked, so the unaware pilot continued with the landing. This accident sequence is consistent with an equipment failure. The part that failed was the landing gear component of the engine mount. It prevented the nose gear from extending fully forward.

The investigation revealed that the right-side nose landing gear component of the engine mount fractured mainly in overstress from a pre-existing fatigue crack. The inspection criteria dictated an examination at 740 flying hours; however, that type of crack may appear before the original scheduled inspection period. On 5 June 2014, Piper Aircraft issued Service Bulletin (SB 1103E) changing the inspection period to 200 hours. The investigation noted that if the requirements prescribed in SB 1103E are not made mandatory for private operators in Canada, there is a continued risk that fatigue cracks may not be discovered in a timely manner.

(Image provided by Transportation Safety Board Canada)

FMI: www.tsb.gc.ca/eng

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC