Space Station To Forge Ultra-Fast Connections | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sun, Feb 16, 2020

Space Station To Forge Ultra-Fast Connections

The Upgrade To The ESA Columbus Laboratory Will Relay Data From Experiments On The Station Back To Earth Almost Instantaneously

Astronauts aboard the International Space Station plan to install a high-speed radio link to enable almost real-time connections with Earth. The device will send signals from the Station, which orbits at an altitude of 250 miles above Earth, even further into space, where they will be picked up by European satellites in geostationary orbit 22,000 miles above the surface.

These satellites – called the European Data Relay System – remain in constant communication with the same ground station on Earth, unlike the Station, which switches from one to another as it loops around the planet every 90 minutes.

Dubbed ColKa for ‘Columbus Ka-band antenna’, the upgraded system will provide speeds of up to 50 Mbit/s for downlink and up to 2 Mbit/s for uplink. This will allow astronauts and researchers to benefit from a direct link with Europe at home broadband speeds – delivering a whole family’s worth of video streaming for science and communications.

A spacewalk later this year will be dedicated to upgrading the Columbus module. Two astronauts will take ColKa through the Station’s airlock and bolt it to the outside of Columbus. The antenna connects to a dedicated plug outside Columbus that feeds the data from the facilities and computers inside.

Columbus was conceived and designed over 20 years ago, when the internet was in its infancy. The laboratory was launched to the Station in 2008 and uses the Station’s network and NASA’s infrastructure for communications with the Columbus Control Center.

The upgrade will ensure faster communications, independent from the NASA system, to relay data from more and more experiments allowing researchers on Earth to access their experiments at all times for another decade to come.

Colka was designed and built by British and Italian companies as prime contractors, using products from Norway, Belgium, France, Canada and Germany, some of which have been qualified under the ESA’s program of Advanced Research in Telecommunications Systems (ARTES).

Colka will use the infrastructure for the European Data Relay System developed as a Partnership Project between ESA and Airbus, as part of ESA’s efforts to federate industry around large-scale programs, stimulating technology developments to achieve economic benefits.

The know-how gained from designing, building and running ColKa will be instrumental for ESA’s communications package under the Esprit project that is being designed for the lunar Gateway – an outpost over 1000 times farther from Earth than the International Space Station.

(Image provided with ESA news release)

FMI: www.esa.int

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC