AD: Gulfstream Aerospace Corporation Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Nov 11, 2020

AD: Gulfstream Aerospace Corporation Airplanes

AD 2020-23-04 Prompted By A Report Of Misassembled Impellers Onto The Shaft Of The Fuel Boost Pump

The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation (Gulfstream) Model GVII-G500 and Model GVII-G600 airplanes.

This AD requires revising your existing airplane flight manual (AFM) and airplane maintenance manual (AMM) to include information pertaining to the fuel boost pump. This AD was prompted by a report of misassembled impellers onto the shaft of the fuel boost pump during production. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 24, 2020.

Supplementary Information: The FAA was notified by Gulfstream of the possibility of misassembled impellers onto the shaft of fuel boost pumps used in the production of GVII-G500 and GVII-G600 airplanes. The supplier of fuel boost pumps discovered two misassembled fuel boost pumps on two different make/models of non-Gulfstream aircraft. The Gulfstream GVII-G500 and GVII-G600 fuel boost pumps are very similar in design and are manufactured in the same facility using the same manufacturing processes, so the same condition could exist on the Gulfstream fuel boost pumps.

A misassembled fuel boost pump could result in a woodruff key becoming dislodged and causing friction between static and rotating components internal to the fuel boost pump. This friction could generate heat or sparks inside the fuel tank, which, if the pump were to run dry, could result in a fuel tank fire or fuel tank explosion.

The unsafe condition, if not addressed, could result in a potential source of ignition in the fuel tank and may lead to fire or explosion.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC