AD: Engine Alliance Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Jun 18, 2021

AD: Engine Alliance Turbofan Engines

AD 2021-12-01 Lowers The Initial Inspection Threshold And Requires Repetitive Ultrasonic Inspections

The FAA is superseding Airworthiness Directive (AD) 2019-25-13, which applied to all Engine Alliance (EA) GP7270 and GP7277 model turbofan engines with a certain low-pressure compressor (LPC) 1st-stage fan blade installed.

AD 2019-25-13 required an ultrasonic inspection of the affected LPC 1st-stage fan blades and replacement of any affected LPC 1st-stage fan blade that fails the inspection. This AD lowers the initial inspection threshold and requires repetitive ultrasonic inspections on affected LPC 1st-stage fan blades. This AD was prompted by a report of an in-flight shutdown (IFSD) of an engine due to the fracture of multiple LPC 1st-stage fan blades. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 28, 2021.

Supplementary Information: The FAA issued AD 2019-25-13, Amendment 39-21011 (84 FR 71770, December 30, 2019), (AD 2019-25-13), for all EA GP7270 and GP7277 model turbofan engines with a certain LPC 1ststage fan blade installed. AD 2019-25-13 required an ultrasonic inspection of the affected LPC 1ststage fan blades and replacement of any affected fan blades that fail the inspection. AD 2019-25-13 resulted from a report of an IFSD of an engine due to the fracture of multiple LPC 1st-stage fan blades. After an analysis of these fractures, the manufacturer determined the fan blades experienced cracks that originated on the internal surface of the convex airfoil and propagated to the point of failure. The cracks originated in a microtexture area that can result in a low-cycle fatigue debit that may allow a crack to initiate and propagate to failure. The FAA issued AD 2019-25-13 to prevent failure of the fan blade.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC