AD: Pratt & Whitney Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sun, Sep 26, 2021

AD: Pratt & Whitney Turbofan Engines

AD 2021-20-01 Requires Removal And Replacement Of The HPT 1st-Stage Hub

The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney PW1500G and PW1900G series turbofan engines with a certain high-pressure turbine (HPT) 1st-stage hub or HPT rotor 1st-stage blade retaining plate installed.

This AD was prompted by a report from the manufacturer who determined that the HPT 1st-stage hub and HPT rotor 1st-stage blade retaining plate fail to meet the published life-cycle limits for each part. This AD requires removal and replacement of the HPT 1st-stage hub and HPT rotor 1st-stage blade retaining plate prior to reaching certain cycle limits. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 27, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Pratt & Whitney PW1500G and PW1900G series turbofan engines with a certain HPT 1st-stage hub or HPT rotor 1st-stage blade retaining plate installed. The NPRM published in the Federal Register on June 29, 2021 (86 FR 34166). The NPRM was prompted by a report from the manufacturer who determined that the HPT 1st-stage hub and HPT rotor 1st-stage blade retaining plate fail to meet the published life-cycle limits for each part. In the NPRM, the FAA proposed to require removal and replacement of the HPT 1st-stage hub and HPT rotor 1st-stage blade retaining plate prior to reaching certain cycle limits. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC