AeroSports Update: Canadian Plane Flies With No Pilot | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Mar 31, 2015

AeroSports Update: Canadian Plane Flies With No Pilot

A Plane With Nobody Aboard Crashed In A Field Near Nipawin, Saskatchewan Canada, And Sure Enough, Nobody Was Hurt

We saw this headline from CBC news out of Canada that reminds us that when you hand prop an airplane, you had better know what you’re doing and follow appropriate procedures. The following is an abridged synopsis of the report:

An initial investigation revealed the pilot tried to “prop start” his plane by standing in front and spinning the propeller by hand. The engine turned over, but before he could get inside the Aeronca Chief two-seater, it began moving forward on the taxiway, gaining enough speed after about 40 feet to become airborne. A little later, the plane crashed.

Police said the pilot was left behind, embarrassed but uninjured. The Transportation Safety Board was notified but an official told CBC News that aside from noting the incident, it would not be pursuing the investigation any further.

We asked flight instructor Earl Downs, who claims to have hand propped thousands of airplanes, to provide us with a short review of safety issues associated with hand propping an engine.

Downs pointed out that hand propping a chief would be the normal way to start it, and it’s obvious that this accident was probably caused by not having the airplane secured. By secured, Downs means either someone in the cockpit who knows how to use the brakes, or at least have it secured by tiedowns and/or chocks.

He cautions that if a pilot does not have formal training on how to hand prop a specific make and model of aircraft, it’s a bad idea to even try it in the first place. Downs says that differences in the magneto installation can affect the success and safety of hand propping.

Another consideration, according to Downs, is whether the hand propping is taking place on an airplane that has no electrical system, or has an electrical system that won’t allow a normal start. His advice is that trying to hand prop an airplane because the battery is dead or the starter has failed is generally bad idea. This is because there are too many variables of how the ignition system operates during starting.

He also points out that some engines simply won’t start by hand propping no matter how hard you try. His bottom line advice is, if you have not been trained on how to hand prop a specific airplane, don’t try it.

(Photo from CBC News taken by the Nipawin Fire Department)

FMI: www.faasafety.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC