TSB Makes Four Runway Safety Recommendations For Canada's Busiest Airport | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Feb 06, 2019

TSB Makes Four Runway Safety Recommendations For Canada's Busiest Airport

Follows 27 Runway Incursions That Occurred Over A Five-Year Period At One Airport

The Transportation Safety Board of Canada (TSB) is making four recommendations, following its safety issue investigation (A17O0038) into 27 runway incursions that occurred between two closely spaced parallel runways at Toronto/Lester B. Pearson International Airport, Ontario, between June 2012 and November 2017.

"Pearson International airport traffic is tightly controlled and monitored, and all 27 incursions examined involved flight crews who understood they needed to stop, and that they were approaching an active runway," said Kathy Fox, Chair of the TSB. "Despite all the visual cues, including lights, signage and paint markings, professional crews were not stopping in time as required, thereby risking a collision with another aircraft on the other runway."

The investigation found that all the incursions happened on the inner runway, after the flight crews involved had landed on the outer runway and were taxiing on a rapid-exit taxiway between the two runways. Several characteristics of the rapid exits in this area, known locally as the "south complex," are different from almost every other major airport in North America. The exits lead directly to the "inner" parallel runway, the hold lines are located immediately following a 65-degree curve and, most notably, they are farther away from the protected runway than is commonly seen elsewhere. These uncommon features mean that the hold lines are not where crews are expecting to see them.

It was also determined that, although flight crews were aware of the increased risk for runway incursions in the area because they are designated as "hot spots" on the airport charts, that guidance did not bring crews' attention to specific strategies to mitigate the risk of incursion. Instead, crews followed their standard operating procedures and initiated their post-landing actions immediately after exiting the runway, taking their attention away from other more critical tasks—such as identifying the hold line. The timing of those tasks distracted the crew at a point when limited time was available to recognize the visual cues requiring them to stop, and contributed to their overlooking those cues.

Today, the TSB is making four recommendations to make these runways safer. The first one is that NAV CANADA amend its phraseology guidance so that safety-critical transmissions are more compelling to flight crews in order for crews to take the safest course of action. The next two recommendations are for Transport Canada and the FAA to work with operators to amend standard operating procedures so that crews only commence post-landing checks after a landing aircraft has cleared all active runways. Finally, the Board recommends that the Greater Toronto Airports Authority make physical changes to the taxiway layout at Pearson International's south complex to address the risk of incursions between the parallel runways.

"Fixing these complex issues won't be easy, which means all those involved must work together," said Fox. "Because clearly, more needs to be done—so that all flight crews see the cues and react as required."

(Source: TSB news release. Image from TSB video accompanying the report)

FMI: Backgrounder

Advertisement

More News

ANN's Daily Aero-Term (04.24.24): Runway Lead-in Light System

Runway Lead-in Light System Runway Lead-in Light System Consists of one or more series of flashing lights installed at or near ground level that provides positive visual guidance a>[...]

ANN's Daily Aero-Linx (04.24.24)

Aero Linx: Aviation Without Borders Aviation Without Borders uses its aviation expertise, contacts and partnerships to enable support for children and their families – at hom>[...]

Aero-FAQ: Dave Juwel's Aviation Marketing Stories -- ITBOA BNITBOB

Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]

Classic Aero-TV: Best Seat in The House -- 'Inside' The AeroShell Aerobatic Team

From 2010 (YouTube Version): Yeah.... This IS A Really Cool Job When ANN's Nathan Cremisino took over the lead of our Aero-TV teams, he knew he was in for some extra work and a lot>[...]

Airborne Affordable Flyers 04.18.24: CarbonCub UL, Fisher, Affordable Flyer Expo

Also: Junkers A50 Heritage, Montaer Grows, Dynon-Advance Flight Systems, Vans' Latest Officially, the Carbon Cub UL and Rotax 916 iS is now in its 'market survey development phase'>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC