No Surprise: NTSB Asks Heli Manufacturers to Install Recording Systems | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Thu, Jun 04, 2020

No Surprise: NTSB Asks Heli Manufacturers to Install Recording Systems

Thus Far; FAA Has Refused to Require Their Installation

As expected for some time, the NTSB, in a safety recommendation report issued Tuesday called on helicopter manufacturers to equip turbine-powered helicopters with crash-resistant systems to record data, audio, and images.

The NTSB asked the manufacturers – Airbus Helicopters, Bell, Leonardo, MD Helicopters, Robinson and Sikorsky – to act since the FAA has not implemented a series of NTSB recommendations made in 2013 and 2015. Those recommendations were issued after NTSB investigators found the lack of recorded data hindered their understanding of several crashes that could have serious flight safety implications.

Helicopters meeting specific criteria established by the FAA are required to have crash-resistant systems to record flight data and cockpit audio. None are currently required to have image recording capability. Despite the lack of action from the FAA, some helicopter operators have equipped their aircraft with recording systems, including image recording capability, even though they are not required to do so.

“The more information we have, the better we can understand not only the circumstances of a crash, but what can be done to prevent future accidents,” said Dana Schulze, Director of the NTSB Office of Aviation Safety. “We are asking that currently available recording technology be put to use in a way that will improve aviation safety.”

The NTSB cited seven helicopter investigations between 2011 and 2017 in which the lack of access to recorded data impeded their ability to identify and address potential safety issues.

They also identified five accidents in which investigators had the benefit of recorded data that was critical to understanding the circumstances of the crashes. The findings and analysis of these investigations resulted in three NTSB urgent recommendations and led the FAA to issue an emergency airworthiness directive affecting an entire fleet of helicopters.

Although the FAA declined to mandate recorders on those helicopters not already required to have them, they said they encouraged operators since 2005 to install the equipment on a voluntary basis. The NTSB, however, said since 86 percent of the 185 turbine-powered helicopter accidents it investigated between 2005 and 2017 had no recording equipment installed, the FAA actions were ineffective.

In addition to asking manufacturers to install crash-resistant recorders on newly built helicopters, the NTSB also asked them to provide a means to retrofit their helicopters with crash-resistant systems capable of recording flight data, cockpit audio and images on their helicopters not already so equipped.

“The data these recorders can provide to investigators are data that can prevent accidents by allowing us to address safety issues that might otherwise go unidentified,” said Schulze.

FMI: www.ntsb.gov, https://go.usa.gov/xwjNj

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC