AD: Yaborã Industria Aeronáutica S.A. | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Jul 10, 2021

AD: Yaborã Industria Aeronáutica S.A.

AD 2021-12-14 Continues To Require Revising The Existing AFM Procedures

The FAA is superseding Airworthiness Directive (AD) 2020-08-11, which applied to all Yaborã Industria Aeronáutica Model ERJ 190-300 and ERJ 190-400 airplanes.

AD 2020-08-11 required revising the existing airplane flight manual (AFM) procedures associated with messages of smoke in the electronic bays presented on the respective engine indication and crew alerting system (EICAS). This AD continues to require revising the existing AFM procedures, and adds requirements for a terminating modification of the electrical wiring of the mid-electronic bay and backup smoke detectors; as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is incorporated by reference. This AD was prompted by a failure propagation test, which revealed that under certain conditions, the smoke detection system of the electrical bays erroneously indicated the presence of smoke via the respective EICAS messages. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective July 26, 2021.

Supplementary Information: The FAA issued AD 2020-08-11, Amendment 39-19903 (85 FR 27112, May 7, 2020) (AD 2020-08-11), which applied to all Yaborã Industria Aeronáutica Model ERJ 190-300 and ERJ 190-400 airplanes. AD 2020-08-11 required revising the existing AFM procedures associated with messages of smoke in the electronic bays presented on the respective EICAS. The FAA issued AD 2020-08-11 to provide the flightcrew with revised AFM procedures for responding to erroneous indications of smoke in the electrical bays presented on the EICAS. The AFM procedures are intended to prevent loss of all electrical digital current (DC) essential buses, causing loss of electrical power for critical systems of the airplane.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC