AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Mon, Aug 15, 2022

AD: The Boeing Company Airplanes

AD 2022-15-07 Requires Revising The Existing Airplane Flight Manual (AFM)

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400 series airplanes.

This AD was prompted by a report that after a certain circuit breaker tripped, power to the two pitot-static (P/S) probe heaters on the right-hand side was lost, and the flightcrew discovered conflicting procedures in the flightcrew operations manual/quick reference handbook (FCOM/QRH). This AD requires revising the existing airplane flight manual (AFM) to incorporate procedures to be applied during P/S probe heater failure conditions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective September 15, 2022. 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 747-400 series airplanes. The NPRM published in the Federal Register on December 28, 2021 (86 FR 73694). The NPRM was prompted by a report that after a certain circuit breaker tripped, power to the two P/S probe heaters on the righthand side was lost, and the flightcrew discovered conflicting procedures in the FCOM/QRH. In the NPRM, the FAA proposed to require revising the existing AFM to incorporate procedures to be applied during P/S probe heater failure conditions. The FAA is issuing this AD to address the conflicting procedures, which could result in the transmission of potentially inaccurate pitot static pressure data to the air data computer (ADC), resulting in erroneous or misleading air data being displayed, which, in combination with a stall, overspeed, overrun, or short/hard landing condition, could result in reduced ability of the flightcrew to maintain continued safe flight and landing of the airplane.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC