Lycoming Engines May Be Hit With A Complicated AD | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Tue, Aug 08, 2017

Lycoming Engines May Be Hit With A Complicated AD

FAA Expected To Formalize Compliance With Mandatory Service Bulletin SB 632A

The owners of thousands of aircraft equipped with Lycoming engines have been notified of Lycoming Mandatory Service Bulletin 632A titled “Identification of Connecting Rods with Non-Conforming Small End Bushings.”

According to Michael Busch, CEO of Savvy Aviation, the bulletin is intended to address a problem with small-end connecting rod bushings (part number LW-13923) that were used shipped by Lycoming to overhaul shops and mechanics between November 2015 and November 2016. There apparently was a quality control problem with the bushings, and some did not have the correct outside diameter to conform with engine specifications.

In a small number of cases, the bushings appear to be migrating out of the connecting rod while in service, which has led to the SB.

At the very least, the SB 632A will affect well over a thousand new and Lycoming-Factory-Rebuilt engines. What is not known is how many engines have been overhauled or repaired in the field during the time when the bushings were being used, and neither Lycoming or the FAA has been willing to say what that number is.

To comply with the SB 632A, any engine that may have the non-conforming bushing must have all cylinders removed within the next 10 hours of operation, and a special tool must be used to determine if the bushing fits properly. Lycoming estimates that there will be a 20 percent failure rate, meaning one in every five connecting rods will have to be replaced. Busch warns that there is a history of catastrophic engine failures after all cylinders have been removed in the field. They also say that the majority of A & P mechanics do not have the expertise to conduct the inspections.

Lycoming has more recently issued a revision of the Service Bulletin, but Busch still believes that the likely AD will be "painful" for may Lycoming owners.

(Image provided with Savvy Aviation newsletter)

FMI: Original Report, SB 632A

 


Advertisement

More News

ANN's Daily Aero-Term (05.16.24): Instrument Runway

Instrument Runway A runway equipped with electronic and visual navigation aids for which a precision or nonprecision approach procedure having straight-in landing minimums has been>[...]

ANN's Daily Aero-Linx (05.16.24)

Aero Linx: Alaska Airmen's Association The Alaska Airmen's Association includes over 2,000 members—we are one of the largest General Aviation communities in the country. We s>[...]

Airborne 05.15.24: Ghost Sq MidAir, B-2 Junked, Dream Chaser Readies

Also: Flt School Security, G600 Steep-Approach, Honduran Aid, PW545D Cert Two aircraft performing at the Fort Lauderdale Air Show clipped wings during a routine last Sunday, spooki>[...]

Airborne 05.10.24: Icon Auction, Drunk MedEvac Pilot, Bell ALFA

Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]

Airborne Affordable Flyers 05.16.24: PRA Runway, Wag-Aero Sold, Young Eagles

Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC