AD: Pratt & Whitney | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Wed, Aug 25, 2010

AD: Pratt & Whitney

AD NUMBER: 2010-17-01

MANUFACTURER: Pratt & Whitney Canada Corp. PW617F-E Turbofan Engines
SUBJECT: Airworthiness Directive 2010-17-01

SUMMARY: This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

A PW617F-E engine powered twin engined aircraft had recently experienced an uncommanded power reduction on one of its engines. Investigation showed that the Fuel Filter Bypass Valve poppet in the Fuel Oil Heat Exchanger (FOHE) on that engine had worn through the housing seat, allowing unfiltered fuel and debris to contaminate the Fuel Metering Unit (FMU), resulting in fuel flow drop and subsequent power reduction.  Pratt & Whitney Canada Corp. issued an Alert Service Bulletin (ASB) No. PW600-72-A66019 to inspect and replace any discrepant valve with the same type new valve. The inspection results confirmed that failure of a worn through poppet is dormant and it can affect both engines at the same time that could result in an unsafe condition on PW617F-E powered aircraft. 

The FAA is issuing this AD to prevent uncommanded power reduction, which could result in the inability to continue safe flight and safe landing.

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/0A16403C9183FB9086257788004C7196?OpenDocument

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC