AD: Williams International Co., L.L.C. Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-NextGen-05.21.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Wed, Jul 06, 2022

AD: Williams International Co., L.L.C. Turbofan Engines

AD 2022-13-15 Prompted By A Report Of Cracks In The High-Pressure Turbine (HPT) Disk Posts

The FAA is adopting a new airworthiness directive (AD) for certain Williams International Co., L.L.C. (Williams) FJ44-2A, FJ44-2C, FJ44-3A, and FJ44-3A-24 model turbofan engines. 

This AD was prompted by a report of cracks in the high-pressure turbine (HPT) disk posts and failure of an HPT disk post, resulting in the contained fracture of an HPT disk post and blade. This AD requires removing the HPT disk, part number (P/N) 67093, from service before reaching defined cycle limits and replacing it with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective August 9, 2022. 

Supplementary Information: The FAA issued a supplemental notice of proposed rulemaking (SNPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Williams FJ44-2A, FJ44-2C, FJ44-3A, and FJ44-3A24 model turbofan engines. The SNPRM published in the Federal Register on April 14, 2022 (87 FR 22153). The SNPRM was prompted by a report of cracks in the HPT disk posts and failure of an HPT disk post, resulting in the contained fracture of an HPT disk post and blade. Subsequently, Williams notified the FAA that revised service information was available, which added additional serial-numbered FJ44-2A, FJ44-2C, and FJ44-3A model turbofan engines to the effectivity and updated the compliance time for replacing the HPT disk. In the SNPRM, the FAA proposed to require removing the HPT disk, P/N 67093, from service before reaching defined cycle limits and replacing it with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products. 

 FMI: www.regulations.gov 

Advertisement

More News

Samson Sky Hits the Wind Tunnel

Improvements Stack as Brand Readies for Mass Production Samson Sky updated followers on its flying car progress, describing some of the travails of the wind tunnel as they get clos>[...]

ANN's Daily Aero-Term (05.22.24): LAHSO

LAHSO An acronym for “Land and Hold Short Operation.” These operations include landing and holding short of an intersecting runway, a taxiway, a predetermined point, or>[...]

Aero-FAQ: Dave Juwel's Aviation Marketing Stories -- ITBOA BNITBOB

Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]

ANN's Daily Aero-Linx (05.19.24)

Aero Linx: Space Medicine Association (SMA) The Space Medicine Branch was founded in 1951 as the first constituent organization of the Aerospace Medical Association (AsMA). In 2006>[...]

ANN's Daily Aero-Term (05.19.24): Back-Taxi

Back-Taxi A term used by air traffic controllers to taxi an aircraft on the runway opposite to the traffic flow. The aircraft may be instructed to back-taxi to the beginning of the>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC