AD: Honda Aircraft Company LLC Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-Unlimited-05.28.24

Airborne-FlightTraining-05.29.24 Airborne-Unlimited-05.30.24

Airborne-Unlimited-05.24.24

Sun, Mar 20, 2022

AD: Honda Aircraft Company LLC Airplanes

AD 2022-05-13 Prompted By A Report Of In-Flight Smoke And Fire That Initiated From The Windshield Heat Power Wire Braid

The FAA is adopting a new airworthiness directive (AD) for certain Honda Aircraft Company LLC (Honda) Model HA-420 airplanes.

This AD was prompted by a report of in-flight smoke and fire that initiated from the windshield heat power wire braid. This AD requires incorporating temporary revisions into the airplane flight manual (AFM) and the quick reference handbook (QRH) that modify procedures for windshield heat operation until the affected windshield assemblies are replaced. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 18, 2022. 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Honda Model HA-420 airplanes. The NPRM published in the Federal Register on September 30, 2021 (86 FR 54126). The NPRM was prompted by a report of in-flight smoke and fire that initiated from the windshield heat power wire braid on a Honda Model HA-420 airplane.

An investigation identified that certain Honda Model HA-420 airplanes could have a severed windshield heat power wire braid from installation of the windshield heat wiring during manufacture. The severed windshield heat power wire braid could cause arcing that ignites the wire sheathing and sealant and the windshield acrylic. This condition, if not addressed, could lead to cockpit smoke and fire. In the NPRM, the FAA proposed to require incorporating temporary revisions into the AFM and the QRH that modify procedures for windshield heat operation until the affected windshield assemblies are replaced. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

USCG MH-60 To The Rescue (Again) -- Rescues 4 Boaters

Capsized Vessel Located Near Dauphin Island, Alabama The Coast Guard rescued four boaters after their vessel capsized near Dauphin Island, Alabama, Thursday. Coast Guard District E>[...]

Gray Eagle Order Placed for Army National Guard

Reserve Components Looking to Improve In-House General Atomics Aeronautical Systems announced a fresh order for a dozen Gray Eagle 25M UAVs with accompanying equipment, for fulfill>[...]

Aero-Biz Survival 101 (1120a): Expert Ideas To Help You Through Tough Times

Brand New! Avoid The Need For A Comeback... Get Your Marketing Right, Right Now! Some time ago, the Aero-News Network, responding to numerous requests, established a marketing and >[...]

Airborne 06.03.24: Rotax 915/916 SB, Starship 4 Ready?, B-17 Mementos

Also: Hubble On Pause, FedEx Pilots Picket, Nexus eVTOL, VFS Honors The Rotax folks have published a Service Bulletin after issues were noted that may affect all R915i and R916i se>[...]

Mid-Continent Instruments and Avionics Mourns Former Leader

John W. Winter of AEA and Avionic Fame Passes John W. Winter brought Mid-Continent Instrument Company into the modern era in 1980, purchasing the firm and using it as a base for ex>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC