NTSB Prelim: Schweizer SGS135 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Jun 29, 2022

NTSB Prelim: Schweizer SGS135

Pilot Was Found Strapped In His Parachute And Harness With The Canopy Closed

Location: Midlothian, TX Accident Number: CEN22FA224
Date & Time: June 5, 2022, 16:30 Local Registration: N2817H
Aircraft: Schweizer SGS135 Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On June 5, 2022, about 1630 central daylight time, a Schweizer SGS135C glider, N2817H, was undamaged when the pilot was found deceased after a landing near Midlothian, Texas. The glider was operated under the provisions of Title 14 Code of Federal Regulations Part 91 as a personal flight.

According to members of the Texas Soaring Association (TSA), the pilot was launched via a towplane around 1500 that day. About 1700, the glider was found by another pilot when he landed at the TSA Gliderport (TA11), Midlothian, Texas. The pilot was found strapped in his parachute and harness with the canopy closed about 150 yards from the intended landing area in an open pasture. None of the members recalled hearing any landing radio calls or distress calls from the pilot.

Examination of the glider found the flaps in the landing position, with the handle locked in the detent. Flight control continuity was established from the controls to the flight surfaces. The left aileron connection from the push rods to the aileron idler horn had the Clevis pin improperly secured and was missing the LSP-1 safety pin which was not located within the fuselage. Despite being partially unseat, the Clevis pin was seated enough for operation of the aileron. No other anomalies were detected with the airframes. Members of the TSA assisted in the disassembly and transportation of the glider from the landing site to the pilot’s hangar. During disassembly, no obvious damage was noted to the glider.

The pilot was 84-years old and had been flying since at least 1973. Glider pilots are not required to hold a medical certificate of any class, and the pilot was flying under that provision. His last Federal Aviation Administration medical certificate was issued on January 5, 2012. On that application, the pilot reported having accrued 3,700 total hours. An autopsy and toxicology testing were ordered for the pilot.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.25.24): Airport Rotating Beacon

Airport Rotating Beacon A visual NAVAID operated at many airports. At civil airports, alternating white and green flashes indicate the location of the airport. At military airports>[...]

ANN's Daily Aero-Linx (04.25.24)

Aero Linx: Fly for the Culture Fly For the Culture, Inc. is a 501(c)(3) non-profit organization that serves young people interested in pursuing professions in the aviation industry>[...]

Klyde Morris (04.22.24)

Klyde Is Having Some Issues Comprehending The Fed's Priorities FMI: www.klydemorris.com>[...]

Airborne 04.24.24: INTEGRAL E, Elixir USA, M700 RVSM

Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]

Airborne 04.22.24: Rotor X Worsens, Airport Fees 4 FNB?, USMC Drone Pilot

Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC