FAA Publishes SAIB On Crash Resistant Seats For Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Thu, Aug 15, 2019

FAA Publishes SAIB On Crash Resistant Seats For Helicopters

SAIB SW-19-15 Addresses Crash Resistant Seats and Structure

A recent SAIB intro's the topic of the document by noting, "This Special Airworthiness Information Bulletin (SAIB) notifies all registered helicopter owners and operators of helicopters that are compliant with the crash resistant seats and structure (CRSS) safety standards of Title 14 of the Code of Federal Regulations (14 CFR) Part 27 through Amendment 27-25 or Part 29 through Amendment 29-29 or later. Non-CRSS compliant helicopters do not warrant airworthiness directive (AD) action under 14 CFR part 39. However, operating a helicopter with CRSS reduces the risk of blunt force trauma injury and improves occupant survivability in an accident."

Further details reveal that, "On December 13, 1989, more stringent CRSS became a regulatory requirement via Amendment 27-25 of 14 CFR Part 27 and Amendment 29-29 of 14 CFR Part 29. The amendments include §§ 27.561, 27.562, 27.785, 29.561, 29.562, and 29.785. The regulations apply to newly type-certificated rotorcraft. Since the regulations are not retroactive, no requirement exists to incorporate their requirements into the existing fleet. The regulations also do not apply to newly manufactured rotorcraft if the rotorcraft are produced under a type design that existed before the regulations became effective on December 13, 1989.

The design requirements included in Part 27 at Amendment 27-25 and Part 29 at Amendment 29-29 increase survivability in the event of a crash by increasing the protection to occupants from excessive vertical and longitudinal impact loads. These requirements also improve survivability by addressing the occupant’s secondary impact with the rotorcraft’s structure, as well as items of mass that may become loose on impact. The design requirements are based in part on the data and conclusions in Report No. DOT/FAA/CT-85/11. The report indicates occupants may be protected by seat designs that use energy management or dissipation and by proper occupant restraint."

The ultimate recommendation is that, "The FAA recommends owners and operators understand the level of crash resistance for the seats and structure provided by their helicopters. The FAA maintains a list (Table 1) of helicopters compliant with the full CRSS safety standards of 14 CFR Part 27 through Amendment 27-25 or later and Part 29 through Amendment 29-29 or later at the following website: https://www.faa.gov/aircraft/air_cert/design_approvals/rotorcraft/media/rot_CRSS_Compliant_List.pdf"

FMI: https://www.faa.gov/aircraft/air_cert/design_approvals/rotorcraft/media/rot_CRSS_Compliant_List.pdf

Advertisement

More News

ANN's Daily Aero-Term (04.24.24): Runway Lead-in Light System

Runway Lead-in Light System Runway Lead-in Light System Consists of one or more series of flashing lights installed at or near ground level that provides positive visual guidance a>[...]

ANN's Daily Aero-Linx (04.24.24)

Aero Linx: Aviation Without Borders Aviation Without Borders uses its aviation expertise, contacts and partnerships to enable support for children and their families – at hom>[...]

Aero-FAQ: Dave Juwel's Aviation Marketing Stories -- ITBOA BNITBOB

Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]

Classic Aero-TV: Best Seat in The House -- 'Inside' The AeroShell Aerobatic Team

From 2010 (YouTube Version): Yeah.... This IS A Really Cool Job When ANN's Nathan Cremisino took over the lead of our Aero-TV teams, he knew he was in for some extra work and a lot>[...]

Airborne Affordable Flyers 04.18.24: CarbonCub UL, Fisher, Affordable Flyer Expo

Also: Junkers A50 Heritage, Montaer Grows, Dynon-Advance Flight Systems, Vans' Latest Officially, the Carbon Cub UL and Rotax 916 iS is now in its 'market survey development phase'>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC