Fri, Aug 23, 2013
Follows May Recommendation For Weight And Balance Control Program
The FAA has released a Safety Alert For Operators (SAFO) to recommend tie-down procedures for restraint of special cargo loads.
In SAFO 13005, dated 5/17/2013, the FAA recommended each part 121 air carrier review its approved weight and balance control program with emphasis on heavy vehicle special cargo loads. Upon further discussion/review of operators’ procedures, the FAA recommends an in-depth review of weight and balance, cargo loading documents or both with emphasis on special cargo loads other than Unit Load Device (ULD) cargo.
The FAA recommends that air carriers review their Weight and Balance manual and cargo loading documents to ensure adherence to the manufacturers’ FAA-approved Weight and Balance manual or supplemental type certificate (STC) supplement. The review is to verify that over-simplified procedure substitutions are not used by the air carrier for securing special cargo load.
The manual must state the policy and provide procedures to determine the intended reaction load for each tie down to ensure sufficient special load restraint for flight loads. This review is to ensure:
- Only the manufactures’ FAA-approved Weight and Balance manual or STC supplement authorized airplane tie-down locations are used.
- Only the manufactures’ FAA-approved Weight and Balance manual or STC supplement authorized seat track locations are used.
- The method of determining the number of straps required to secure a load by dividing the payload weight by a reduced strap allowable is not recommended. This method does not reflect the strength, or lack of, the actual vehicle or airplane attach point.
- The straps are only effective for the direction(s) of force for which that strap is restraining the cargo.
- Each strap is secured to the special cargo load. The method of looping a strap through a vehicle tie-down results in the capability of each leg of the strap being reduced to the weaker of the two strap tie-down attachment points on the airplane.
- Must ensure the tie-down points and capability are defined for the special load and airplane.
Questions or comments concerning this SAFO can be directed to Steven Fox, P.E., FAA Senior Aerospace Engineer, Airframe Branch, Seattle Aircraft Certification Office.
More News
States That Current Process is Damaging National Aerospace Development US Senator Jerry Morgan is pushing the FAA to speed up the process for rocket launch licensing. He argues tha>[...]
From 2015 (YouTube Edition): Model Aviator Aims For Full-Scale Career While at the 2015 Indoor Electric RC Festival, referred to as eFest, ANN CEO and Editor-In-Chief, Jim Campbell>[...]
Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]
Aero Linx: Cardinal Flyers Online The Cardinal Flyers Online Web site was created and is maintained by me, Keith Peterson. My wife Debbie and I have owned a 1976 RG since 1985. Wit>[...]
Clearance Void If Not Off By (Time) Used by ATC to advise an aircraft that the departure release is automatically canceled if takeoff is not made prior to a specified time. The exp>[...]