AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sun, Sep 19, 2021

AD: The Boeing Company Airplanes

AD 2021-18-09 Prompted By A Report That An Operator Found Solid Rivets With Missing Heads

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 777 airplanes.

This AD was prompted by a report that an operator found solid rivets with missing heads at the left buttock line 25 on the sloping pressure deck web. This AD requires doing a detailed inspection of the left- and right-side sloping pressure deck at certain stations for any damaged solid rivets, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 22, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 777 airplanes. The NPRM published in the Federal Register on April 9, 2021 (86 FR 18479).

The NPRM was prompted by a report that an operator found solid rivets with missing heads at the left buttock line 25 on the sloping pressure deck web. In the NPRM, the FAA proposed to require doing a detailed inspection of the left- and right-side sloping pressure deck at certain stations for any damaged solid rivets, and applicable on-condition actions. The FAA is issuing this AD to address damaged or missing solid rivet heads on the sloping pressure deck web, which could result in loss of sloping pressure deck panels, causing decompression and pressure loss, and loss of the hydraulic systems in the area for wheel brakes (both normal and alternate) and steering, and potentially leading to runway departure and adversely affecting the structural integrity of the airplane.

FMI: www.regulations.gov

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC