EASA Certifies A320 'Sharklets' | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Dec 04, 2012

EASA Certifies A320 'Sharklets'

Airbus Expects Certification Of Wingtip Devices On Other Models To Follow

EASA has certified the "Sharklet" wingtip devices on airbus A320s with CFM engines. This certification, received from the European airworthiness authorities (EASA), is expected to be followed "very soon" by FAA certification, Airbus said.

“The certification of Airbus’ Sharklets is a milestone which paves the way for airlines to benefit from savings in fuel of around four percent," said Tom Williams, Executive Vice President of Programs at Airbus. "That’s better than we’d anticipated. The annual greenhouse gas emission reduction per aircraft equipped with Sharklets will be approximately 1,000 tonnes of CO2 – that’s equivalent to taking 200 cars off the roads.”
 
For the flight test campaign, A320 Family aircraft with both CFM56 and V2500 engines have recently taken to the skies with Sharklets. When complete, this flight testing will represent approximately 600 flight-hours spread over 9-10 months. Certification of the remaining aircraft/engine variants with Sharklets will therefore follow in the coming months. By the end of 2012, Air Asia will become the first airline to take delivery of Sharklet-equipped A320s.
 
Due to what Airbus says is very strong customer demand for Sharklets, all Airbus’ single-aisle final assembly lines (FALs) will be engaged in building A320 Family aircraft with the devices. These FALs are located in Toulouse, Hamburg and Tianjin and will soon be followed by an additional A320 FAL in Alabama.
 
Sharklets wingtip devices are made from composites and are about 8 feet tall. Attached to the A320’s wing-tip during the assembly process, Airbus says they reduce fuel burn and emissions by improving the aerodynamics of the aircraft while increasing range. They are an option on new-build aircraft, and are standard on the A320neo Family. Airbus has been in a dispute with Aviation Partners Boeing over the devices, which the smaller company says infringe on its patents for blended winglets.

(Image provided by Airbus)

FMI: www.airbus.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Airborne 05.06.24: Gone West-Dick Rutan, ICON BK Update, SpaceX EVA Suit

Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC