AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.07.24

Fri, Dec 25, 2020

AD: The Boeing Company Airplanes

AD 2020-26-09 Requires Repetitive External Surface High Frequency Eddy Current (HFEC) Inspections

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes.

This AD was prompted by a report of cracks found in fastener holes at a certain station of the center wing box. This AD requires repetitive external surface high frequency eddy current (HFEC) inspections and repetitive external surface ultrasonic inspections; or repetitive internal detailed inspections; of a certain station of the center wing box for any cracking, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective January 27, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. The NPRM published in the Federal Register on September 22, 2020 (85 FR 59449). The NPRM was prompted by a report of cracks found in fastener holes at a certain station of the center wing box. The NPRM proposed to require repetitive external surface HFEC inspections and repetitive external surface ultrasonic inspections; or repetitive internal detailed inspections; of a certain station of the center wing box for any cracking, and repair if necessary.

The FAA is issuing this AD to address any cracking found in fastener holes at the center wing box, which could result in inability of a principal structural element to sustain limit load and could adversely affect the structural integrity of the airplane.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (06.11.24): Abeam

Abeam An aircraft is “abeam” a fix, point, or object when that fix, point, or object is approximately 90 degrees to the right or left of the aircraft track. Abeam indic>[...]

ANN's Daily Aero-Linx (06.11.24)

Aero Linx: The Air Charter Safety Alliance The group, called the Air Charter Safety Alliance, will raise awareness of illegal charter flights among potential customers, charter bro>[...]

Aero-News: Quote of the Day (06.11.24)

“For months, ALPA has been sounding the alarm on the ongoing efforts by some aircraft manufacturers to remove pilots from the flight deck and replace them with automation. To>[...]

Airborne Affordable Flyers 06.06.24: 200th ALTO, Rotax SB, Risen 916iSV

Also: uAvionix AV-Link, Does Simming Make Better Pilots?, World Games, AMA National Fun Fly Czech sportplane manufacturer Direct Fly has finished delivering its 200th ALTO NG, the >[...]

Aero-News: Quote of the Day (06.12.24)

“The legislation now includes a task force with industry representation ensuring that we have a seat at the table and our voice will be heard as conversations about the futur>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC