AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Sep 07, 2021

AD: Airbus SAS Airplanes

AD 2021-17-04 Requires A One-Time Inspection Of The Area Around The Latch Hook Mounting Holes Of The Forward And Aft Door Frames

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A321-211, -231, and -232 airplanes.

This AD was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. This AD requires a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 5, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0222, dated October 14, 2020 (EASA AD 2020-0222) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus SAS Model A321-211, -231, and -232 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A321-211, -231, and -232 airplanes. The NPRM published in the Federal Register on March 8, 2021 (86 FR 13229). The NPRM was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. The NPRM proposed to require a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in EASA AD 2020-0222.

The FAA is issuing this AD to address damage from false drill starts, which could result in reduced structural integrity of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Airborne 05.10.24: Icon Auction, Drunk MedEvac Pilot, Bell ALFA

Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]

ANN's Daily Aero-Term (05.13.24): ILS PRM Approach

ILS PRM Approach An instrument landing system (ILS) approach conducted to parallel runways whose extended centerlines are separated by less than 4,300 feet and at least 3,000 feet >[...]

ANN's Daily Aero-Linx (05.13.24)

Aero Linx: FlyPups FlyPups transports dogs from desperate situations to fosters, no-kill shelters, and fur-ever homes. We deliver trained dogs to veterans for service and companion>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Airborne 05.08.24: Denali Update, Dad-Daughter Gyro, Lake SAIB

Also: NBAA on FAA Reauth, DJI AG Drones, HI Insurance Bill Defeated, SPSA Airtankers The Beechcraft Denali continues moving forward towards certification, having received its FAA T>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC