Comment Period Open Through June 1
As expected, the FAA has issued an AD for Boeing Dreamliners powered by Rolls-Royce plc (RR) Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, and Trent 1000-L2 turbofan engines.
The AD requires revising the airplane flight manual to limit extended operations (ETOPS). It was prompted by a report from the engine manufacturer indicating that after an engine failure, prolonged operation at high thrust settings on the remaining engine during an ETOPS diversion may result in failure of the remaining engine before the diversion can be safely completed.
According to the AD, the agency says it has been aware of several engine failures of Trent 1000 Package C engines due to failed compressor and turbine blades and seals over the past year. Package C engines are Rolls-Royce plc (RR) Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, and Trent 1000-L2 turbofan engines.
During that same period, under the management programs for those engine issues, the FAA has noted been aware of numerous reports of engine inspection findings of cracked blades resulting in unscheduled engine removals. Boeing reported to the FAA that the engine manufacturer recently determined that intermediate pressure compressor (IPC) stage 2 blades have a resonant frequency that is excited by the airflow conditions existing in the engine during operation at high thrust settings under certain temperature and altitude conditions.
The resultant blade vibration can result in cumulative fatigue damage that can cause blade failure and consequent engine shutdown. In the event of a single engine in-flight shutdown during the cruise phase of flight, thrust on the remaining engine is normally increased to maximum continuous thrust (MCT). During a diversion following a single engine shutdown under an ETOPS flight, the remaining engine may operate at MCT for a prolonged period, under which the IPC stage 2 blades would be exposed to the resonant frequency condition. Therefore, an ETOPS diversion will put the remaining engine at an operating condition that would significantly increase the likelihood of failure of the remaining engine. In addition, if the remaining engine already had cracked IPC stage 2 blades, the likelihood of the remaining engine failing will further increase before a diversion can be safely completed.
The AD affects 14 airplanes of U.S. registry. The FAA estimates the cost of compliance will be $85 per aircraft for one hour of labor to update the flight manuals. Comments on the AD must be received by June 1, 2018
(Image from file)
FMI: AD