Fri, Jul 02, 2004
Any Day Now...
A long time in the birthing phase, Aerocomp's long awaited
kit-built jet is poised to take to the skies after a little more
taxi testing. So far, under the command of Test Pilot Ron Lueck
(who has been the veteran assigned to many other first time flights
on a number of large kit-built turbine aircraft), the bird has been
zooming up and down the runway at Merritt Island, working it's way
up to 65 knots in order to make sure that all systems are ready for
flight.
Ron says the bird feels good so far, accelerating to 65 knots in
as little as 400-500 feet, and offering good braking and
directional control on the ground. Powered by a single AI-25
powerplant with 3400 pounds of thrust available for take-off and
with a huge wing, Ron expects the bird to stay on the ground for
only a brief time, once he pours some serious jet fuel into the
beast.
Designed to be something of a "poor" man's corporate jet, the
"CA-J" is The "CA-J" offers seating for 8 and a projected cruise
speed of 400 mph TAS @ 22K'. The kit's airframe uses a proprietary
carbon-fiber hybrid sandwich to loft an impressive 8900 lb. max.
gross takeoff weight with a projected 4500 lb. empty weight. Useful
load for the CA-J is expected to be in the 4400 lb. range.
The CA-J carries 480 gallons of fuel... which should result in a
range of 1100 SM. Pressurized, the cabin will be capable of
maintaining 10K cabin altitude at the airplane's 29,900' service
ceiling. Built to be as roomy as it's piston and turboprop
forebears, the CA-J offers a comfortable 70" tall, 68" wide
cabin.
Power for the CA-J is the department of a single factory-reman'd
3000 hr TBO AI-25 Jet (Bypass) engine (the same you'll find in the
highly regarded L-39) rated for 3400 lbs. takeoff thrust and 2500
lbs. of cruise thrust. Cruise fuel consumption is expected to be
about 160 gph. Future versions of the bird are expected to be
adaptable to P&W JT12-8 or CJ610 powerplants.
Aerocomp is committed to a safe and conservative flight test
program... but if there are no hiccups or delays, it is possible
that the machine could make it's flying debut at Oshkosh -- less
than 4 weeks away. We'll keep you updated as to the progress of
this intriguing (and aggressive) project.
More News
Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]
Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]
Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]
From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]
Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]