Sat, Feb 20, 2021
AD 2021-02-19 Repetitive General Visual Inspections Of The Bilge Barriers Located In The Forward And Aft Cargo Compartments
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes.
This AD requires repetitive general visual inspections of the bilge barriers located in the forward and aft cargo compartments for disengaged or damaged decompression panels, reinstallation of disengaged but undamaged decompression panels, and replacement of damaged decompression panels. This AD was prompted by reports of multiple incidents of torn decompression panels being found in the bilge area. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective March 8, 2021.
Supplementary Information: The FAA has received reports of multiple incidents of torn decompression panels being found in the bilge area. These torn decompression panels were found after accomplishment of the actions required by AD 2018-05-06, Amendment 39-19215 (83 FR 9688, March 7, 2018) (AD 2018-05-06), which requires repetitive inspections of the bilge barriers in the forward and aft cargo compartments for disengaged decompression panels; reinstalling any disengaged panels; and replacing the decompression panels with new panels and straps. The torn decompression panels present a different unsafe condition than that addressed by AD 2018-05-06, so the FAA is issuing this AD to address the new unsafe condition. In the event of a cargo fire, significant leakage in the bilge area could result in insufficient Halon concentrations to adequately control the fire. This condition, if not addressed, could result in the loss of continued safe flight and landing of the airplane.
In addition to this AD addressing a different unsafe condition than the one specified in AD 2018-05-06, this AD also includes models that are not affected by the unsafe condition specified in AD 2018-05-06. Both ADs include reinstallation and replacement actions as part of the required oncondition actions. AD 2018-05-06 requires certain service information for the reinstallation and replacement instructions, which refer to airplane maintenance manual (AMM) procedures. However, this AD requires using the operator's maintenance or inspection program, as applicable, for the reinstallation and replacement instructions.
More News
Also: Horizon Picks P&W PT6A, Army Buys 3 EagleNXT, First Hybrid-Electric Regional, Army Selects AEVEX Anduril Industries’ YFQ-44A Collaborative Combat Aircraft was flown>[...]
While Flying North Along The Beach At About 300 Ft Above Ground Level, The Pilot Reported That The Engine RPM Dropped To About Idle On September 28, 2025, at 1126 eastern daylight >[...]
Aero Linx: European Association of Aviation Training and Educational Organisations (EATEO) Welcome to the “ European Association of Aviation Training and Education Organizati>[...]
On-Course Indication An indication on an instrument, which provides the pilot a visual means of determining that the aircraft is located on the centerline of a given navigational t>[...]
“It also gives us the hard data we need to shape requirements, reduce risk, and ensure the CCA program delivers combat capability on a pace and scale that keeps us ahead of t>[...]
Airborne-NextGen 11.04.25: Anduril YFQ-44A, Merlin SOI 2, UAV Rulemaking Stalled
See All