AeroSports Update: From LSA To Airliner, Use Transponders On The Ground | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Mon, Jun 08, 2015

AeroSports Update: From LSA To Airliner, Use Transponders On The Ground

The FAA Has Issued An Advisory For All Aircraft, Whether Large Or Small, To Use Their Transponders In The Altitude Reporting Mode On The Ground

There was a time when transponders first entered wide use in general aviation that the rule was to always have it off or in standby on the ground, and to be prepared to use the standby mode if a controller requested it in flight. In those early days it was possible to overload the capability of controllers to follow transponder traffic. That’s changed, but there is still one very special place and time when transponders must be deactivated.

The FAA has recently issued a Safety Alert for Operators (SAFO) advising all operators and pilots of the need to ensure that transponders be on and in the altitude reporting mode whenever their aircraft is on an airport movement area at all airports.

This is because the FAA uses airport surface surveillance capabilities at some of the busiest airports in the U.S. to determine aircraft and vehicle location when they are operating on an airport movement area. Runway safety systems, such as Airport Surface Detection EquipmentModel X and Advanced Surface Movement Guidance and Control System use data from surface movement radar and aircraft transponders to obtain accurate aircraft and vehicle locations.

The effectiveness of these grounded detection systems is dependent on operators equipping and operating cooperative surveillance capabilities (i.e., altitude reporting transponders). Nationwide, airports with the systems report an average of twenty non-compliance transponder events per day, even with airport diagram or ATIS, or both, verbiage directing pilots to operate with transponders on. The FAA is asking that all aircraft operating on all airport movement areas at all airports to have their transponders on in the altitude reporting mode, even if the airport is not equipped with the ground surveillance radar.

Even though the FAA is making quite an issue of using your transponder and altitude reporting at all times, there is one major exception to this rule and it’s coming up at the end of July. For those of you flying to EAA AirVenture, the NOTAM published for arrival and departure procedures into Wittman Regional Airport includes a paragraph with the following statement regarding the FISK VFR arrival to Oshkosh: “Ensure lights are on and transponder set to Standby within 30 miles of OSH.” Be sure to read the NOTAM carefully.

FMI: www.faa.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC