AD: Rolls-Royce plc (RR) Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Sep 04, 2013

AD: Rolls-Royce plc (RR) Turbofan Engines

AD NUMBER: 2013-15-10

PRODUCT: All RR RB211-Trent 553-61, 553A2-61, 556-61, 556A2-61, 556B-61, 556B2-61, 560-61, 560A2-61, 768-60, 772-60, 772B-60, 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-17 turbofan engines.
SUBJECT: Airworthiness Directive 2013-15-10
ACTION: Final Rule

SUMMARY: The FAA is superseding airworthiness directive (AD) 2012-10-12 for the products listed above. AD 2012-10-12 required inspecting the intermediate-pressure (IP) compressor rotor shaft rear balance land for cracks.

The FAA is issuing this AD to require inspections of the IP compressor rotor shaft, as required by AD 2012-10-12, to add on-wing inspections for the Trent 500 engines, and to add onwing and in-shop inspections for the Trent 900 engines. This AD was prompted by detection of a crack in a Trent 500 IP compressor rotor shaft rear balance land during a shop visit. Further engineering evaluation, done by RR, concluded that the cracking may also exist in Trent 900 engines.

The FAA is issuing this AD to detect cracking on the IP compressor rotor shaft rear balance land, which could lead to uncontained engine failure and damage to the airplane.

DATES: This AD is effective October 8, 2013.

FMI: AD

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC