Fly Safe: Performing Post-Maintenance Pre-Flight Checks | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Tue, Sep 17, 2019

Fly Safe: Performing Post-Maintenance Pre-Flight Checks

FAA Says Aircraft Just Out Of Maintenance Are More Likely To Have Safety-Of-Flight Issues

Do you know how to properly preflight your aircraft after maintenance? Many pilots secretly admit that they sometimes don’t quite know what they are looking for. Does that concern you? It should, since the pilot is the final authority when it comes to the aircraft’s fitness for safe flight.

As a pilot and/or aircraft owner, it is in your best interest to know and understand every component of your aircraft. You may think you have even less to worry about after your aircraft comes back from the shop. It should be in great shape, right?

Actually, aircraft just out of maintenance are more likely to have safety-of-flight issues than an aircraft in good condition flown on a daily basis. Something simple shouldn’t cause a problem, but work on multiple systems leaves the door open for more than a few complications.

For example, in-flight emergencies and accidents have occurred with incorrectly rigged flight control or trim systems. Loose bolts or a forgotten connector have led to other tragedies. It’s best to be on the safe side, know what work has been done, know what you are looking for, and perform thorough preflight checks.

Advanced Preflights go above and beyond the normal preflight checklist. Create your checklist by reviewing the maintenance history of the aircraft, and once you have that information, develop your additional items checklist. Once you have made this list, you can use it in all future preflight inspections. Find and review all aircraft records, including receipts, work orders, FAA Form 337s (Major Repair and Alteration forms) and approval for return to service tags (8130-3 Forms). Find any Supplemental Type Certificate (STC) data, including information on items no longer installed on the aircraft.

Some additional tips:

  • Become familiar with all controls and systems before maintenance, and create a baseline. Having this information will make it easier for you to find any “abnormal” functions after maintenance.
  • Coordinate with your mechanic to determine exactly what has been accomplished. Give those systems an extra look-over before flight.
  • Pay particular attention to the aircraft components that were replaced or repaired. If you suspect a problem, ask your mechanic to recheck the aircraft.
  • Be ready to abort take-off if something doesn’t feel right.
  • For the first flight, stay in the pattern within gliding distance to the runway.

Your safety, and the safety of those who fly with you, depends on your vigilance. Check, ask questions, and recheck. Your life may depend on it.

(Source: FAA. Image from file)

FMI: www.faa.gov/news/safety_briefing/2016/media/se_topic_16_02.pdf

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC