Thu, Feb 12, 2009
Says Proper Overhaul Procedures Were Not Followed
The Federal Aviation Administration (FAA) has issued an
Emergency Order of Suspension against AAR Landing Gear Services of
Miami, FL for violations of Federal Aviation Regulations.
AAR is an FAA-certificated repair station operating under Part
145 of the Federal Aviation Regulations, with ratings to repair
aircraft landing gear, airframe and aircraft accessories.
The Emergency Order was issued following inspections which
revealed that AAR did not follow aircraft manufacturer maintenance
manual procedures for conducting liquid penetrant exams, shot
peening and cadmium plating before returning to service a variety
of landing gear parts for air carrier aircraft. The FAA maintains
AAR employed defective processes and followed defective inspection
protocols.
Shot peening is a procedure to harden the surface of metal parts
and remove corrosion. Cadmium plating is a coating applied to metal
parts to prevent corrosion. Penetrant examination is a non-
destructive testing method usually performed to detect cracks and
corrosion.
The agency determined that AAR's actions returned aircraft parts
to service as being overhauled when they were not, and failed to
perform required maintenance procedures. All affected operators
were notified of the suspect parts in March 2008 and corrective
action was taken.
The Emergency Order of Suspension was effective Tuesday, and
remains in effect until AAR Landing Gear Services demonstrates that
it meets the requirements of the Federal Aviation Regulations.
AAR may appeal the Emergency Order to the National
Transportation Safety Board by February 20.
"We have worked diligently with the FAA over the past year to
respond to its concerns," said David P. Storch, Chairman and Chief
Executive Officer, AAR CORP. "We remain committed to resolving this
matter as expeditiously as possible. The company will also work
equally hard to minimize any inconvenience to its customers and
employees during this period."
More News
Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]
Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]
Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]
From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]
Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]