Beringer Wheels And Brakes Promotes ALIR System | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-NextGen-05.21.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Fri, Jul 30, 2010

Beringer Wheels And Brakes Promotes ALIR System

Stop Locking 'Em Up

By Dan Billingsley

Tired of finding flat spots on your tires? Beringer Wheels and Brakes says its Anti-Lock Inline Regulator (ALIR) may just be the fix you are looking for. The regulator is placed inline between the master cylinders and brakes, and has a knob that adjusts the maximum pressure delivered to the calipers. Fine tuning between landings will achieve exacting performance, adjusting the pressure to stop (at full application) just prior to locking up and skidding. Just think of it as a governor for slowing down.


Beringer ALIR System

Standard GA braking requires the pilot to apply just the correct amount of pressure…judging when to increase or decrease. When the Inline Regulator is installed, the company says the pilot may apply full pressure on the brakes at touchdown without a concern of lock-up. The advantages include; Shorter stopping distance, less tire wear, less brake wear and certainly a safer landing.


Braking Chart

The chart above shows a comparison of the same plane with the ALIR system and without it, and all possible variables were held constant. Note how the maximum braking pressure is achieved quicker in braking with the system (blue line) as opposed without it (red line). The shorter stopping distance as well as those points noted above fall in line.

Beringer is a family owned business who just celebrated their 25th anniversary of delivering wheels and brake systems to the motorcycle industry. They are now gaining ground in the aviation arena and their wheels and brake systems (upon examination) look to be very high quality. The aluminum alloy wheels are CNC machined into three parts and assembled with O-rings, providing a tubeless system.


Beringer Brake Adjustment Tool

They encourage the use of their complete wheel and breaking system when installing the ALIR, as the engineering was a package design. Expect to pay about $2000.00 for a complete system. The regulator can work with other systems, however, they encourage contacting them prior to purchasing. The regulator alone is about $200.00

FMI: www.beringer-aero.com

Advertisement

More News

ANN's Daily Aero-Term (05.19.24): Back-Taxi

Back-Taxi A term used by air traffic controllers to taxi an aircraft on the runway opposite to the traffic flow. The aircraft may be instructed to back-taxi to the beginning of the>[...]

Aero-News: Quote of the Day (05.19.24)

“Our WAI members across the nation are grateful for the service and sacrifice of the formidable group of WASP who served so honorably during World War II. This group of brave>[...]

Aero-News: Quote of the Day (05.20.24)

“Many aspiring pilots fall short of their goal due to the cost of flight training, so EAA working with the Ray Foundation helps relieve some of the financial pressure and mak>[...]

ANN's Daily Aero-Term (05.20.24): Blind Speed

Blind Speed The rate of departure or closing of a target relative to the radar antenna at which cancellation of the primary radar target by moving target indicator (MTI) circuits i>[...]

ANN's Daily Aero-Linx (05.20.24)

Aero Linx: International Airline Medical Association (IAMA) The International Airline Medical Association, formerly known as the Airline Medical Directors Association (AMDA) was fo>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC