Sat, Mar 07, 2020
Experiment Studies The Stability Of Foams Away From The Influence Of Earth’s Gravity
Airbus has sent a new fluid experiment, FOAM-C, to the International Space Station (ISS). FOAM-C, which was developed and manufactured for the European Space Agency (ESA), is scheduled to be activated this month by astronaut Jessica Meir, who has been on the ISS since September 2019.
The FOAM-C experiment studies the stability of foams away from the influence of Earth’s gravity. The scientists are interested in the behaviour of the foams at different liquid fraction and in particular around the point of un-jamming (transition from a solid-like to liquid-like structure), which can be studied only in microgravity.
In addition this experiment might provide useful insights for the manufacture, use and ageing behaviour of foams, which are utilised in a wide range of areas, including in cosmetics and personal-hygiene products, in the food industry, in cleaning products, sealing products and for firefighting.
The FOAM-C experimental set-up comprises five segments with a total of 20 small test cells containing a variety of liquid mixtures. The Fluid Science Laboratory on the ISS Columbus module will automatically shake and analyse these mixtures using complex laser optics, highly sensitive photodiodes and high-resolution cameras that can take up to 10,000 images per second.
Each test cell weighs only 20 grams (0.7 ounces) and contains less than 2 cm³ (0.12 in³) of the liquid mixture, while each segment comprises four test cells and weighs a total of 320 grams (11 ounces).
(Image provided wit Airbus news release)
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]