AD: Saab AB, Support and Services | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Thu, Feb 25, 2021

AD: Saab AB, Support and Services

AD 2021-02-02 Requires An Inspection For Correct Installation Of The MLG Anti-Skid System Harnesses

The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model SAAB 2000 airplanes. This AD was prompted by a report of inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the main landing gear (MLG) wheel axles.

This AD requires an inspection for correct installation of the MLG anti-skid system harnesses and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective March 29, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0137, dated June 18, 2020 (EASA AD 2020-0137) (referred to after this as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Saab AB, Support and Services Model SAAB 2000 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Saab AB, Support and Services Model SAAB 2000 airplanes. The NPRM published in the Federal Register on October 1, 2020 (85 FR 61877). The NPRM was prompted by a report of inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the MLG wheel axles. The NPRM proposed to require an inspection for correct installation of the MLG anti-skid system harnesses and corrective actions if necessary, as specified in an EASA AD.

The FAA is issuing this AD to address inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the MLG wheel axles, which could lead to wrong inputs to the anti-skid function, whenever activated, with consequent reduced braking capability, and possibly result in damage to the airplane and loss of control during landing. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC