Sat, Jan 10, 2009
Ice... Ain't Nice!
For those of us who have "hit the boots" (or the equivalent
system on your favorite bird) a few times in the last few days due
to the ever-present seasonal 'charms' of in-flight icing, we
thought a series of short tips from Cirrus Design's Scott Winter
(yes, that IS his real name) might help us all to consider some of
the realities of this time of year. So... here are the first of
seven tips for dealing with icing. Y'all be careful out there!
Icing Aero-Tip #6: Known Icing Conditions
In a recent letter of interpretation (which is still being
"clarified"), the FAA Eastern Region offered a definition of what
is considered known icing conditions. The letter states that known
icing conditions exist when visible moisture or high relative
humidity combines with temperatures near or below freezing.
It continues to state that since clouds are visible moisture,
flying through them when the temperature is at or below freezing
would constitute flight into known icing conditions. Althought
somewhat ameliorated since then, the letter strictly concludes with
"Flight into known icing conditions when the airplane flight manual
or pilot operating handbook prohibit such flight constitutes a
violation whether the aircraft accretes ice or not."
About Scott Winter
Scott is a member of the Flight Standards Department at Cirrus
Design Corporation in Duluth, MN (one of those places that see more
than its fair share of icing encounters). Born and raised in
Milwaukee, WI, he discovered his passion for aviation at an early
age. After obtaining his Private Pilot Certificate prior to his
senior year in high school, he attended Minnesota State University,
Mankato (MSU) and graduated with a Bachelor's degree majoring in
Professional Flight. In December 2006, he completed his Master's of
Science degree from MSU spending time focusing on aviation weather,
scenario-based training, and visualization techniques to enhance
the methods used to educate aviators.
Note: ANN thanks Cirrus Pilot William Dobson
and other members of the Cirrus community, for the use of the
excellent SR20 icing pix...
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]