NTSB Prelim: Bell UH 1H | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Jun 11, 2020

NTSB Prelim: Bell UH 1H

Witness: The Tail Rotor Separated From The Helicopter

Location: Mesa, AZ Accident Number: WPR20LA130
Date & Time: 04/24/2020, 1600 MST Registration: N3276T
Aircraft: Bell UH 1H Injuries: 1 Fatal, 1 Serious
Flight Conducted Under: Part 91: General Aviation - Positioning

On April 24, 2020, about 1600 mountain standard time, a Bell UH-1H helicopter, N3276T, was substantially damaged when it was involved in an accident in Mesa, Arizona. The pilot was fatally injured, and the passenger was seriously injured. The helicopter was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 relocation flight.

Witnesses reported they observed the helicopter flying low towards Falcon Field Airport (FFZ), Mesa, Arizona, with white smoke coming from the rear rotor area. Suddenly, the tail rotor separated from the helicopter and landed in a dirt lot below. The helicopter continued northeast as it started to spin and impact the ground.

On scene examination by a Federal Aviation Administration Inspector indicated that the debris field was about 1/2 mile, extending along a generally northeast direction. The first identified piece of debris were fragments of glass, which were consistent with a navigation light on the vertical stabilizer. About 200 yards further northeast was the tail rotor assembly, and the input pinion gear assembly. The rest of the helicopter came to rest about ½ mile further northeast in an open, slightly sloped field. The first pieces of debris in the field were the vertical stabilizer and a portion of the horizontal stabilizer followed by two long and narrow ground strikes consistent with main rotor blade strikes. Immediately following this area was the main wreckage; the helicopter came to rest slightly nose, and left side low, along a heading of about 49 degrees. The helicopter exhibited upward crushing throughout the cabin and fuselage, most extensively on the left side of the fuselage. The mast and the main transmission were displaced forward, and the main rotor assembly was fracture separated. The main rotor blade assembly was the last major piece of debris located about 20 yards northeast of the main wreckage.

The helicopter has been recovered to a secure location for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Airborne 05.06.24: Gone West-Dick Rutan, ICON BK Update, SpaceX EVA Suit

Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC