AD: De Havilland Aircraft of Canada Limited | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Jul 07, 2022

AD: De Havilland Aircraft of Canada Limited

AD 2022-13-08 Requires Doing An Inspection To Determine The Part Number And Serial Number Of The NWS Hydraulic Motor

The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes.

This AD was prompted by reports of nose wheel steering (NWS) hydraulic motors jamming during pushback or towing. This AD requires doing an inspection to determine the part number and serial number of the NWS hydraulic motor, and re-identifying or replacing the NWS hydraulic motor if necessary. This AD also prohibits the installation of certain NWS hydraulic motors. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective August 10, 2022.

Supplementary InformaTION: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued TCCA AD CF-2021-28, dated August 5, 2021 (also referred to after this as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes. You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0394.  The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and 402 airplanes. The NPRM published in the Federal Register on April 6, 2022 (87 FR 19813). The NPRM was prompted by reports of NWS hydraulic motors jamming during pushback or towing. The NPRM proposed to require doing an inspection to determine the part number and serial number of the NWS hydraulic motor, and re-identifying or replacing the NWS hydraulic motor if necessary. The NPRM also proposed to prohibit the installation of certain NWS hydraulic motors. The FAA is issuing this AD to address a possible NWS hydraulic motor jam, which could lead to a runway excursion and loss of controllability of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Airborne 05.10.24: Icon Auction, Drunk MedEvac Pilot, Bell ALFA

Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]

ANN's Daily Aero-Term (05.13.24): ILS PRM Approach

ILS PRM Approach An instrument landing system (ILS) approach conducted to parallel runways whose extended centerlines are separated by less than 4,300 feet and at least 3,000 feet >[...]

ANN's Daily Aero-Linx (05.13.24)

Aero Linx: FlyPups FlyPups transports dogs from desperate situations to fosters, no-kill shelters, and fur-ever homes. We deliver trained dogs to veterans for service and companion>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Airborne 05.08.24: Denali Update, Dad-Daughter Gyro, Lake SAIB

Also: NBAA on FAA Reauth, DJI AG Drones, HI Insurance Bill Defeated, SPSA Airtankers The Beechcraft Denali continues moving forward towards certification, having received its FAA T>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC