NATCA Says Supervisor's Cell Phone Conversation Contributed To Runway Incursion | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Oct 02, 2008

NATCA Says Supervisor's Cell Phone Conversation Contributed To Runway Incursion

Controllers Union Says FAA Worker Missed Trainee's Ground Vehicle Mishap

One week ago -- in what the National Air Traffic Controllers Association termed "a brazenly callous move" -- the Federal Aviation Administration supervisor at the Flying Cloud Airport (FCM) control tower turned his back on runway operations during an on-the-job training exercise to take a call on his cell phone... and missed his trainee mistakenly clear an airport vehicle to cross the runway in front of a departing aircraft.

The union's announcement is but the latest accusation levied by controllers against the FAA, since the agency declared an impasse in contract talks and imposed a new pay agreement on NATCA-represented controllers in June 2006 (yes, it's been that long -- Ed.)

FAA spokeswoman Elizabeth Isham Cory acknowledged the apparent "operational error," and said the FAA is reviewing the September 22 incident. Cory added the plane in question was stopped on the runway at the time of the incursion -- an apparent 'stop-and-go' training exercise, in which the pilot stopped on the runway after landing to reconfigure the aircraft, prior to taking off again.

Cory added the truck was clear of the runway well before the single-engine aircraft started its ground roll... adding that the pilot and truck driver even waved to each other as the truck drove down a parallel taxiway.

That doesn't matter, NATCA responds. The FAA has a strict ban on cell phone usage in its operational areas. The supervisor was training the facility's manager, who was attempting to learn ground control for the first time.

The union asserts that during the training session, the supervisor turned his back on the trainee and active ground control operations to take a phone call. Due to the lack of supervision the trainee/manager permitted an airport vehicle to cross an active runway... an clear oversight, and one that could have spelled disaster.

"This is another case of FAA supervisors flaunting the agency's blatant and hypocritical disregard for safety," said Great Lakes Regional Vice President Bryan Zilonis. "If a controller had committed this same unsafe act they would be, at the very least, suspended if not dismissed entirely. NATCA wants to see the same treatment for these management officials and we're waiting with bated breath to see what, if anything, the FAA will do. Clearly the FAA wants its controllers to do as it says and not as it does."

Cory bristled at NATCA's accusation of unfair treatment. "We treat all our employees fairly," she said.

FMI: www.faa.gov, www.natca.org

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC