Fri, Sep 07, 2012
Action Prompted By EASA, Transport Canada ADs
The FAA is proposing to adopt a new airworthiness directive (AD) for Eurocopter Deutschland GmbH (ECD) Model BO-105A, BO-105C, BO-105S, BO-105LS A-1, BO-105LS A-3, MBB-BK 117 A-1, MBB-BK 117 A-3, MBB-BK 117 A- 4, MBB-BK 117 B-1, MBB-BK-117 B-2, and MBB-BK 117 C-1 helicopters to require inspections for corrosion or thread damage to each tail rotor balance weight (weight) and each tail rotor control lever (lever).
This proposed AD is prompted by an EASA AD and a Transport Canada Civil Aviation (TCCA) AD, both issued based on a report that corrosion was detected on a weight in the area of the attachment thread on a model BO-105 helicopter. The proposed actions are intended to detect corrosion and thread damage in the threaded area of the weight and lever, and to prevent failure of a weight or lever, separation of tail rotor parts, severe vibration, and subsequent loss of control of the helicopter.
The proposed AD would require compliance with specified portions of the manufacturer's service bulletin in conducting repetitive visual inspections of each weight and lever and would provide procedures for installing a weight or lever. Additionally, it proposes allowable tolerances for corrosion or thread damage on the threaded portion of a weight or lever and would require that a part with corrosion or mechanical damage in excess of allowable tolerances be replaced with an airworthy part.
The FAA's proposed AD does not provide an extra 60 flight hours or 6 months beyond the repetitive compliance time of 600 flight hours or 48 months for the repetitive inspections, as stipulated by both the European and Canadian ADs. These proposals only apply to those model helicopters type-certificated in the United States.
Comments are due on the proposed AD by October 29.
More News
Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]
Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]
Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]
From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]
Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]