XP-82 Twin Mustang Restoration Update | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Aug 25, 2018

XP-82 Twin Mustang Restoration Update

Project Slowed Due To Complications, Wheels To Be Replaced

The years-long restoration of a rare XP-82 Twin Mustang is inching closer to completion, with a goal of having an airworthy airplane at the end of the process.

Warbird news reports that owner and restorer Tom Reilly had hoped to have the airplane ready to fly for AirVenture this year, but was unable to do so. But with that deadline no longer a factor, Reilly says he plans to replace the original magnesium alloy wheels with modern aluminum rims that are currently being fabricated.

Reilly explained his reasoning in a letter to Warbird News:

"After much thought I have chosen a warbird restoration facility and specialty machine shop in Cameron Park, CA. Chuck Wahl, the owner, has been specializing in making replacement wheels for warbirds for a number of years. I ran my decision past John Eiler, our main machinist for your XP-82, and he agreed with my decision. Chuck has been making 32″ x 8.8″ wheels for F4U Corsairs and SBDs for a number of years," Reilly wrote.

"Yesterday I sent him the lower spindle leg off of the crashed Alaska F-82 for fitting purposes, along with one of the original magnesium brake calipers. I had previously sent a non-airworthy wheel to John Eiler to copy and he is forwarding that wheel out to Chuck Wahl.

"Chuck manufactures his wheels out of 7075-T6 aluminum and they have been tested to failure at over ten times the strength of the original magnesium wheel. He will be able to identically duplicate our wheel for authenticity.

"The total price for these two wheels will be approximately $19K with a 3-4 week delivery period.

"What were the chances of our wheels failing, probably less than zero percent. But, after two known failures of this style wheel, one on an F7F Tigercat at Oshkosh and more recently, one on a TBM Avenger, I had no choice but to make this decision.

"We have had countless comments (now over 300) on our website and Facebook page, every one agreeing with my safety decision. If I were to have a wheel failure on our XP-82 the public backlash would be catastrophic; if we didn’t totally lose the airplane due to an uncontrollable magnesium fire."

(Image from file)

FMI: Source report

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC