NTSB Prelim: Cirrus Design Corp SR20 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Jul 02, 2021

NTSB Prelim: Cirrus Design Corp SR20

After The Airplane Overflew Runway 4, It Entered A Steep Left Bank And Then Spun

Location: Conway, AR Accident Number: CEN21FA277
Date & Time: June 18, 2021, 13:57 Local Registration: N62WR
Aircraft: CIRRUS DESIGN CORP SR20 Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On June 18, 2021, about 1357 central daylight time, a Cirrus SR20 airplane, N62WR, was destroyed when it was involved in an accident at the Conway Regional Airport (CXW), Conway, Arkansas. The pilot and sole occupant sustained fatal injuries. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.

A witness reported that after the airplane departed Runway 22 at, CXW, he heard a transmission over the Universal Integrated Communications (UNICOM) frequency that stated “six-two whiskey Romeo emergency landing runway 2.” Shortly thereafter, he observed the accident airplane make a left turn and overfly runway 4 and stated that the airplane appeared “crazy fast.” After the airplane overflew runway 4, it entered a steep left bank and then spun. The airplane made one and a half rotations and then impacted the ground.

The airplane impacted the ground in a nose low, inverted attitude. the right wing fractured and pieces of the wing were located in the initial ground scar. Propeller slash marks were found in the ground near the initial impact point and contained white paint transfer signatures (see Figure 1). The propeller blades were found fractured and separated from the crankshaft flange.

Fragments of windscreen were found in the vicinity of the propeller. During the impact sequence, the Cirrus Airframe Parachute System (CAPS) deployed and the canopy was found still bundled in a straight line away from the wreckage. The total debris field from the CAPS rocket to the main wreckage was about 110 ft. A post-accident examination revealed the pitot tube cover remained secured on the pitot tube.

The airplane’s avionics were retained for download and analysis.

FMI: www.regulations.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC